Ignition point in reactingFoam? -- CFD Online Discussion Forums

July 11, 2011, 18:00	Ignition point in reactingFoam?	#1
lfgmarc Member Luis Felipe Gutierrez Marcantoni Join Date: Oct 2010 Location: Cordoba-Argentina Posts: 47 Rep Power: 15	Hi, I trying to simulate a non premixed flame (diffusive flame) in openFoam, first I try with fireFoam but I not understand very well this solver, then I decided to use reactingFoam, I made several tests with ignition by autoignition, now I want to make a case with a piloted ignition but I am not sure if using reactingFoam is possible to define an ignition point like in XiFoam, If any one know how I can do it, I was very thankful with some advice. thanks Felipe Vitor Monteiro likes this. __________________ Felipe G

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ignition in reactingFoam	pas32	OpenFOAM Programming & Development	4	August 13, 2014 09:00
reactingFoam floating point exception	pajofego	OpenFOAM	0	November 6, 2010 17:29
Spark Ignition at two point ?	ngoctm	CFX	0	February 13, 2009 02:59
[Gmsh] Gmsh and samplesurface	touf	OpenFOAM Meshing & Mesh Conversion	2	December 10, 2007 02:27
CFX4.3 -build analysis form	Chie Min	CFX	5	July 12, 2001 23:19

All times are GMT -4. The time now is 19:58.