CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Programming & Development (http://www.cfd-online.com/Forums/openfoam-programming-development/)
-   -   wall Functions (http://www.cfd-online.com/Forums/openfoam-programming-development/94896-wall-functions.html)

cfdonline2mohsen November 29, 2011 09:58

wall Functions
 
Dear Foamers,

i am working on some kind of wall functions for heat transport simulation in channel
any help or document about the formulation of wall functions for k, epsilon, nut and alphat could be useful.
thanks in advance for any documentation, papers or thesis in this field

lakeat November 29, 2011 15:08

Quote:

Originally Posted by cfdonline2mohsen (Post 333962)
Dear Foamers,

i am working on some kind of wall functions for heat transport simulation in channel
any help or document about the formulation of wall functions for k, epsilon, nut and alphat could be useful.
thanks in advance for any documentation, papers or thesis in this field

I would suggest you first go to the source directly, and there would be description for each wall treatment and turb model, and then write down the equation from the .C files. And then compare it with the main stream convention, see if there is any difference. And by this way, you can use it correctly.


All times are GMT -4. The time now is 15:33.