CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Programming & Development

FSI solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 6, 2012, 02:35
Default FSI solver
  #1
New Member
 
aignn
Join Date: Dec 2011
Posts: 10
Rep Power: 4
aignn is an unknown quantity at this point
hi
i work with openfoam 1.5 and i need to use fsi "Fluid Structure Interaction"solver and cant find it
how can install it and use it?
please
tanks
aignn is offline   Reply With Quote

Old   February 6, 2012, 10:40
Default
  #2
New Member
 
aignn
Join Date: Dec 2011
Posts: 10
Rep Power: 4
aignn is an unknown quantity at this point
anyone?
please help me
aignn is offline   Reply With Quote

Old   February 6, 2012, 17:33
Default
  #3
Senior Member
 
bigphil's Avatar
 
Philip Cardiff
Join Date: Mar 2009
Location: Dublin,Ireland
Posts: 570
Rep Power: 19
bigphil will become famous soon enoughbigphil will become famous soon enough
Hi,

There is icoFsiFoam in OpenFOAM-1.6-ext found at $FOAM_SOLVERS/stressAnalysis/icoFsiFoam.

You can find quite a bit on FSI if you search the forum.

Philip
bigphil is offline   Reply With Quote

Old   February 7, 2012, 04:06
Default
  #4
New Member
 
aignn
Join Date: Dec 2011
Posts: 10
Rep Power: 4
aignn is an unknown quantity at this point
i havn't opneFoam 1.6 i just have 1.5,and 2.00
is there any way to insltall it?
aignn is offline   Reply With Quote

Old   February 7, 2012, 05:56
Default
  #5
Senior Member
 
bigphil's Avatar
 
Philip Cardiff
Join Date: Mar 2009
Location: Dublin,Ireland
Posts: 570
Rep Power: 19
bigphil will become famous soon enoughbigphil will become famous soon enough
If you search the forum, you will find a lot of information on FSI.

As far as I know you must use the Extend version of OpenFOAM i.e. OpenFOAM-1.6-ext

Philip
bigphil is offline   Reply With Quote

Old   February 7, 2012, 11:42
Default
  #6
Senior Member
 
Elvis
Join Date: Mar 2009
Location: Sindelfingen, Germany
Posts: 579
Blog Entries: 5
Rep Power: 13
elvis is on a distinguished road
Hi,

the Slax Live Image was for the OpenFoam workshop (4th) in Montreal (2009) if I am not mistaken.
the last Openfoam Workshop (6th) (2011)was in Penn State and the Image (Ubuntu LTS image) that was made for this workshop can still be downloaded

http://rcc.its.psu.edu/ofw6/ofw6_v8.iso

this Image contains Openfoam 1.6-extend => so you have FSI stuff is on that Live-Image.

As you are interested in FSI have a look at

http://www.openfoamworkshop.org/6th_...m/training.htm
Multi-Zonal Multi-Physics Modeling: FSI and Congjugate Heat/Mass Transfer,
R. Campbell and B. Craven, PSU
http://www.openfoamworkshop.org/6th_...ven_slides.pdf
http://www.openfoamworkshop.org/6th_...erTraining.tgz
http://www.openfoamworkshop.org/6th_...ell_slides.pdf
http://www.openfoamworkshop.org/6th_...mpbell_fsi.tgz
http://www.openfoamworkshop.org/6th_...ord_slides.pdf
and
http://www.openfoamworkshop.org/6th_...rdi_slides.pdf
http://www.openfoamworkshop.org/6th_...chi_slides.pdf

Do you want to run a CFD (Openfoam) <=> FEM (Openfoam) FSI Simulation
or a CFD (Openfoam) <=> FEM (not Openfoam(lets say Calculix or something else) FSI Simulation?
Do you use GGI to calculate on non conforming meshes?
elvis is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
different results between serial solver and parallel solver wlt_1985 FLUENT 10 April 11, 2012 15:25
error in two way fsi kmgraju CFX 1 May 2, 2011 02:32
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
FSI Negative Element Volume Fatal Error Aaron CFX 2 July 1, 2008 20:48
why the solver reject it? Anyone with experience? bearcat CFX 6 April 28, 2008 14:08


All times are GMT -4. The time now is 07:20.