CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Programming & Development (http://www.cfd-online.com/Forums/openfoam-programming-development/)
-   -   Problems with Probes (http://www.cfd-online.com/Forums/openfoam-programming-development/99237-problems-probes.html)

LeFrog March 29, 2012 05:09

Problems with Probes
 
Hello Openfoamers,

does anyone know how to set the precision of the time, written in the probe-folders, if you probe the U and the p- Fields. At the moment it writes out only with the precision of 0.1:

36535.2 (0.0420636 0.00180577 0.000343072)
36535.2 (0.0420595 0.00180536 0.000346606)
36535.2 (0.0420553 0.00180495 0.000350141)
36535.2 (0.0420512 0.00180454 0.000353673)
36535.2 (0.0420471 0.00180412 0.000357204)
36535.2 (0.042043 0.0018037 0.000360731)
36535.2 (0.0420389 0.00180327 0.000364257)
36535.3 (0.0420347 0.00180284 0.00036778)
36535.3 (0.0420306 0.00180241 0.0003713)
36535.3 (0.0420265 0.00180198 0.000374818)
36535.3 (0.0420224 0.00180154 0.000378335)
36535.3 (0.0420182 0.00180109 0.000381848)
36535.3 (0.0420141 0.00180065 0.000385359)

Changing this Precions from 6 to 9 hadn't helped.

writePrecision 9;

writeCompression uncompressed;

timeFormat general;

timePrecision 9;

Greetings

LeFrog

LeFrog March 29, 2012 12:10

Problem solved - OpenFoam can't change the timePrecision while running - so there is no problem...


All times are GMT -4. The time now is 05:13.