CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

heatsource on cooler -> using buoyantBoussinesqSimpleFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 24, 2012, 09:23
Default heatsource on cooler -> using multiRegions
  #1
Member
 
Klio
Join Date: Mar 2012
Location: Austria
Posts: 45
Rep Power: 6
klio is on a distinguished road
Hello!

I want to simulate a heat source on a aluminum cooler inside a fluidmesh using multiRegions.

So my questions:

How can I set a heatsource (energy) an a coupled patch?

Thanks a lot!

Last edited by klio; April 26, 2012 at 02:34.
klio is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
IOField<List<scalar > > heavy_user OpenFOAM 1 June 19, 2012 16:29
STL -> GMSH -> OpenFOAM eric.m.tridas OpenFOAM 7 September 7, 2011 12:06
1.7.x -> buoyantPimpleFoam -> hRhoThermo -> incompressible and icoPoly3ThermoPhysics? will.logie OpenFOAM Programming & Development 1 February 16, 2011 21:52
1.7.x -> buoyantPimpleFoam -> hRhoThermo -> incompressible and icoPoly3ThermoPhysics? will.logie OpenFOAM 0 December 16, 2010 08:08
CAD -> gMsh -> enGrid -> OpenFOAM Problem AlGates OpenFOAM 7 August 6, 2010 12:46


All times are GMT -4. The time now is 01:31.