CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

viscosity for compressible fleos (rhosimplecfoam)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 28, 2012, 20:50
Default viscosity for compressible fleos (rhosimplecfoam)
  #1
Senior Member
 
Mihai Pruna
Join Date: Apr 2010
Location: Boston
Posts: 190
Blog Entries: 1
Rep Power: 7
mihaipruna is on a distinguished road
For incompressible flows, you define the kinematic viscosity in the transportproperties file.
That apparently is not used by compressible solvers. I can't figure out where you specify the dynamic viscosity mu.
mihaipruna is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Too low temperature at combustor outlet romekr FLUENT 2 February 6, 2012 11:02
modelling solids viscosity in eulerian multiphase model derkaiser FLUENT 1 December 5, 2011 04:42
Power - Law Viscosity Model for Polymers NickolasPl OpenFOAM 2 August 12, 2011 08:26
kinematic viscosity at diff temperatures,pressures Mecobio Main CFD Forum 0 November 7, 2005 13:55
Problem of Turbulent Viscosity Ratio Limited David Yang FLUENT 3 June 3, 2002 06:13


All times are GMT -4. The time now is 00:02.