CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Heat Transfer Error HELP!!!! (http://www.cfd-online.com/Forums/openfoam-solving/104728-heat-transfer-error-help.html)

tomloh July 13, 2012 18:56

Heat Transfer Error HELP!!!!
 
Hi Foamers,

I am quite new to OpenFOAM, I was hoping someone would be able to give me some guidance to how I can fix the error shown below. I am using rhoSimpleBaffleFoam to model the heat transfer over a jet exhaust nozzle.

Error:
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0


SIMPLE: no convergence criteria found. Calculations will run for 2000 steps.

Reading thermophysical properties

Selecting thermodynamics package ePsiThermo<pureMixture<constTransport<specieThermo <hConstThermo<perfectGas>>>>>


--> FOAM FATAL ERROR:
Not implemented

From function basicThermo::h()
in file basicThermo/basicThermo.C at line 260.

FOAM aborting

#0 Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam211/platforms/linuxGccDPOpt/lib/libOpenFOAM.so"
#1 Foam::error::abort() in "/opt/openfoam211/platforms/linuxGccDPOpt/lib/libOpenFOAM.so"
#2 Foam::basicThermo::h() in "/opt/openfoam211/platforms/linuxGccDPOpt/lib/libbasicThermophysicalModels.so"
#3
in "/home/tom/OpenFOAM/tom-2.1.1/platforms/linuxGccDPOpt/bin/rhoSimpleBaffleFoam"
#4 __libc_start_main in "/lib/i386-linux-gnu/libc.so.6"
#5
in "/home/tom/OpenFOAM/tom-2.1.1/platforms/linuxGccDPOpt/bin/rhoSimpleBaffleFoam"
Aborted (core dumped)
Thank you in advance to anyone who can offer help.

Regards,
Thomas


All times are GMT -4. The time now is 16:06.