CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Fsi Foam parallel problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 1, 2017, 18:16
Default Fsi Foam parallel problem
  #1
New Member
 
Join Date: Nov 2016
Posts: 13
Rep Power: 9
manu551 is on a distinguished road
Hi all,

I started fsiFoam in parallel, but it gaves me the bold error. Serial processing work, but not parallel. Everyone has any idea?


Code:
Create time

Create dynamic mesh for time = 0

Selecting dynamicFvMesh dynamicMotionSolverFvMesh
// using new solver syntax:
motionU
{
    solver          PCG;
    preconditioner  DIC;
    tolerance       1e-06;
    relTol          0;
}

Selecting motion solver: velocityLaplacian
Selecting motion diffusion: quadratic
Selecting motion diffusion: inverseDistance
 Reading stress mesh
Selecting incompressible transport model Newtonian
Selecting turbulence model type RASModel
Selecting RAS turbulence model SpalartAllmaras
SpalartAllmarasCoeffs
{
    sigmaNut        0.66666;
    kappa           0.41;
    Cb1             0.1355;
    Cb2             0.622;
    Cw2             0.3;
    Cw3             2;
    Cv1             7.1;
    Cv2             5;
}

Creating fixed displacement boundary condition
Creating traction displacement boundary conditions
Creating traction displacement boundary conditions
Selecting rheology model linearElastic
Creating constitutive model
Selecting coupling scheme Aitken

Starting time loop

Time = 1e-05

Create extended GGI zone-to-zone interpolator
Checking fluid-to-solid face interpolator
Fluid-to-solid face interpolation error: 0.07098772543
Checking solid-to-fluid point interpolator (GGI)
Extended GGI, master point distance, max: 0, avg: 0, min: 0
Extended GGI, master point orientation (<0), max: -1, min: -1, nIncorrectPoints: 0/190
Solid-to-fluid point interpolation error (GGI): 1.387948177e-17
Number of uncovered master faces: 0
Number of uncovered slave faces: 0

Time = 1e-05, iteration: 1
Current fsi under-relaxation factor: 0.4
[0] 
[0] 
[0] --> FOAM FATAL ERROR: 
[0] global zone point map is not availabel
[0] 
[0]     From function fluidStructureInterface::updateDisplacement()
[0]     in file fluidStructureInterface/fluidStructureInterface.C at line 1241.
[0] 
FOAM parallel run aborting
[0] 
[1] 
[1] 
[1] --> FOAM FATAL ERROR: 
[1] global zone point map is not availabel
[1] 
[1]     From function fluidStructureInterface::updateDisplacement()
[1]     in file fluidStructureInterface/fluidStructureInterface.C at line 1241.
[1] 
FOAM parallel run aborting
[1]
Thanks.
manu551 is offline   Reply With Quote

Old   August 10, 2017, 02:12
Default
  #2
Member
 
rezaeimahdi's Avatar
 
mahdi
Join Date: Nov 2015
Location: Paris, France
Posts: 32
Rep Power: 10
rezaeimahdi is on a distinguished road
Quote:
Originally Posted by manu551 View Post
Hi all,

I started fsiFoam in parallel, but it gaves me the bold error. Serial processing work, but not parallel. Everyone has any idea?


Code:
Create time

Create dynamic mesh for time = 0

Selecting dynamicFvMesh dynamicMotionSolverFvMesh
// using new solver syntax:
motionU
{
    solver          PCG;
    preconditioner  DIC;
    tolerance       1e-06;
    relTol          0;
}

Selecting motion solver: velocityLaplacian
Selecting motion diffusion: quadratic
Selecting motion diffusion: inverseDistance
 Reading stress mesh
Selecting incompressible transport model Newtonian
Selecting turbulence model type RASModel
Selecting RAS turbulence model SpalartAllmaras
SpalartAllmarasCoeffs
{
    sigmaNut        0.66666;
    kappa           0.41;
    Cb1             0.1355;
    Cb2             0.622;
    Cw2             0.3;
    Cw3             2;
    Cv1             7.1;
    Cv2             5;
}

Creating fixed displacement boundary condition
Creating traction displacement boundary conditions
Creating traction displacement boundary conditions
Selecting rheology model linearElastic
Creating constitutive model
Selecting coupling scheme Aitken

Starting time loop

Time = 1e-05

Create extended GGI zone-to-zone interpolator
Checking fluid-to-solid face interpolator
Fluid-to-solid face interpolation error: 0.07098772543
Checking solid-to-fluid point interpolator (GGI)
Extended GGI, master point distance, max: 0, avg: 0, min: 0
Extended GGI, master point orientation (<0), max: -1, min: -1, nIncorrectPoints: 0/190
Solid-to-fluid point interpolation error (GGI): 1.387948177e-17
Number of uncovered master faces: 0
Number of uncovered slave faces: 0

Time = 1e-05, iteration: 1
Current fsi under-relaxation factor: 0.4
[0] 
[0] 
[0] --> FOAM FATAL ERROR: 
[0] global zone point map is not availabel
[0] 
[0]     From function fluidStructureInterface::updateDisplacement()
[0]     in file fluidStructureInterface/fluidStructureInterface.C at line 1241.
[0] 
FOAM parallel run aborting
[0] 
[1] 
[1] 
[1] --> FOAM FATAL ERROR: 
[1] global zone point map is not availabel
[1] 
[1]     From function fluidStructureInterface::updateDisplacement()
[1]     in file fluidStructureInterface/fluidStructureInterface.C at line 1241.
[1] 
FOAM parallel run aborting
[1]
Thanks.
Hello,

I'm using also fsiFoam to run a case, however, still no solution for parallel simulation with that. Could you please let me know did you find any solution?

more or less same error:

[2] --> FOAM FATAL ERROR:
[2] Cannot find file "points" in directory "constant/solid/polyMesh"


Thanks
rezaeimahdi is offline   Reply With Quote

Old   February 20, 2018, 19:36
Default
  #3
New Member
 
Wei Meng
Join Date: May 2017
Posts: 12
Rep Power: 8
Tomko is on a distinguished road
Hi mahdi, I am also facing the same problem...Have you solved it?
Tomko is offline   Reply With Quote

Old   June 24, 2019, 07:15
Default
  #4
New Member
 
Hamed
Join Date: Dec 2013
Location: Istanbul
Posts: 16
Rep Power: 12
Hamed1117 is on a distinguished road
you are probably using scotch for decompose algorithm, first try simple algorithm in you decomposeParDict.


cheers
Hamed
Hamed1117 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error running simpleFoam in parallel Yuby OpenFOAM Running, Solving & CFD 14 October 7, 2021 05:38
[Salome] Salome import "Cannot find file "points" in directory..." mismichael OpenFOAM Meshing & Mesh Conversion 5 June 22, 2019 03:56
problem during mpi in server: expected Scalar, found on line 0 the word 'nan' muth OpenFOAM Running, Solving & CFD 3 August 27, 2018 05:18
damBreak case parallel run problem behzad-cfd OpenFOAM Running, Solving & CFD 5 August 2, 2015 18:18
Incompatible dimensions for operation ruben23 OpenFOAM Running, Solving & CFD 2 June 12, 2015 05:14


All times are GMT -4. The time now is 03:29.