CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (https://www.cfd-online.com/Forums/openfoam-solving/)
-   -   dynOneEqEddy and homogeneousDynOneEqEddy (https://www.cfd-online.com/Forums/openfoam-solving/107983-dynoneeqeddy-homogeneousdynoneeqeddy.html)

owayz October 10, 2012 19:03

dynOneEqEddy and homogeneousDynOneEqEddy
 
Hi,
I have OF 2.1.1 installed on my machine today I was trying to use dynOneEqEddy model and was NOT able to find it.
The name is still there included for compressible LESModels in openfoam, but its no more available in 2.1.1. Instead you can find homogeneousDynOneEqEddy Model, I would like to ask if there are any differences between these two?
It would be of great help if someone could point that out.

Regards,
Awais

morard October 12, 2012 04:30

Hi Awais,

homogeneousDynOneEqEddy is similar to the dynOneEqEddy. In the .C files you can see that constant ck is defined as dimensionedScalar, and in the both models is calculated on the same way. There is just small difference in coding..
I'm using OF 2.1.x and now I see that
dynOneEqEddy in 2.1.x is actually the locDynOneEqEddy in 1.7.1 (and probably also in 2.something)... I've checked it briefly, not 100 % sure..

Regards,
Dejan

owayz October 12, 2012 11:29

Hi Dejan,
Thanks for your reply. I will also try to look into detail. But could you please show me some example LESProperties and fvSchemes and fvSolution file that you used with dynOneEqEddy model.

Regards,
Awais

owayz October 12, 2012 11:45

In fact you are right they are perfectly the same.

Regards,
Awais

morard October 12, 2012 11:49

Hi once again.
Just check the channelFoam tutorial >> channel395 case. I use the same LESProperties, fvSchemes and fvSolution. The only difference is that instead of oneEqEddy I usually use dynOneEqEddy. I tried to make some small changes but didn't see any big influence on the results.

Dejan


All times are GMT -4. The time now is 14:47.