advice for modeling water tank

ryan_c · November 14, 2012, 23:43

Hello All:
I am looking for advice in modeling flow in a drinking water storage tank. I have some past experience with Fluent. I have gone through the Openfoam tutorials and ran a few of my own test cases on smaller meshes but am otherwise fairly new to Openfoam. The test cases I have run used simplefoam to model single phase incompressible isothermic flow. I would like to progress to a multiphase model that includes water in the bottom of the tank overlain with a layer of air and includes buoyancy effects from differential water temperatures. In looking at the models, I have not seen any that combine multiphase flow and heat transfer.

Any suggestions? Thank you in advance.

Lieven · November 15, 2012, 16:42

It seems that the best option is to write a new solver combining interFoam with buoyantBoussinesqPimpleFoam.

November 14, 2012, 23:43	advice for modeling water tank	#1
ryan_c New Member Ryan Join Date: Nov 2012 Posts: 1 Rep Power: 0	Hello All: I am looking for advice in modeling flow in a drinking water storage tank. I have some past experience with Fluent. I have gone through the Openfoam tutorials and ran a few of my own test cases on smaller meshes but am otherwise fairly new to Openfoam. The test cases I have run used simplefoam to model single phase incompressible isothermic flow. I would like to progress to a multiphase model that includes water in the bottom of the tank overlain with a layer of air and includes buoyancy effects from differential water temperatures. In looking at the models, I have not seen any that combine multiphase flow and heat transfer. Any suggestions? Thank you in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Filling Tank with Water	leff	CFX	7	August 21, 2017 07:47
Simple Water Tank Transient	88phil88	CFX	5	March 17, 2014 03:48
Mixture and Decay of a tracer in a Water Tank	Jeffrey1992	CFX	2	July 27, 2012 13:31
Mass conservation problem in mixing tank multiphase simulation	rockewan	FLUENT	0	April 6, 2010 12:34
uptodate water distribution network	fredius,magige,tanzanian,(e.a)	Main CFD Forum	0	January 27, 2002 07:10

November 15, 2012, 16:42		#2
Lieven Senior Member Lieven Join Date: Dec 2011 Location: Leuven, Belgium Posts: 299 Rep Power: 22	It seems that the best option is to write a new solver combining interFoam with buoyantBoussinesqPimpleFoam.