CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

SprayEngineFoam - multiple injections

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 2, 2013, 09:23
Default SprayEngineFoam - multiple injections
  #1
ris
Member
 
ri
Join Date: Oct 2012
Posts: 34
Rep Power: 13
ris is on a distinguished road
Hello,

I am attempting to simulate spray and combustion with multiple injections using sprayEngineFoam. I have used the system folder and engine-geometry files of enginefoam and the spraycloudproperties/chemistry/thermophysical/combustion files of sprayfoam.
My simulation runs fine with a single injection event, however when I implement multiple injections the programme fails with a segmentation fault at the start of the second injection. The logs show no indication of anything out of the ordinary.
I have attached my case folder, please could someone look at this and let me know where I could be going wrong. I am using OF-2.1.x .

Many Thanks,

ris.
Attached Files
File Type: zip sprayEngineFoam.zip (93.7 KB, 101 views)
ris is offline   Reply With Quote

Old   January 3, 2013, 19:43
Default
  #2
ris
Member
 
ri
Join Date: Oct 2012
Posts: 34
Rep Power: 13
ris is on a distinguished road
I tried to implement this in openfoam-1.6-ext with the same mesh and comparable settings but it fails from a sigFloat error.
Does anyone have any ideas on this or the above post? Or maybe a working case that contains multiple injection events that I could have a look at.

ris.
ris is offline   Reply With Quote

Old   January 4, 2013, 13:10
Default
  #3
Senior Member
 
mturcios777's Avatar
 
Marco A. Turcios
Join Date: Mar 2009
Location: Vancouver, BC, Canada
Posts: 740
Rep Power: 28
mturcios777 will become famous soon enough
Have you turned on all the debug flags for the lagrangian clouds in OpenFOAM-2.1.x/etc/controlDict? Not all the flags are on by default; turn on anything that says cloud/particle/parcel to see if you get any more useful output.
mturcios777 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
OpenFOAM static build on Cray XT5 asaijo OpenFOAM Installation 9 April 6, 2011 13:21
UDF for sampling particles from multiple injections JaC Fluent UDF and Scheme Programming 0 March 31, 2010 11:43
Coal Injections problem Carlo FLUENT 0 September 30, 2009 07:15
Multiple surface particle injections from the command line mbeals FLUENT 0 June 3, 2009 15:11


All times are GMT -4. The time now is 07:46.