CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   how to use waveTransmissive in groovyBC? (http://www.cfd-online.com/Forums/openfoam-solving/112313-how-use-wavetransmissive-groovybc.html)

immortality January 25, 2013 15:20

how to use waveTransmissive in groovyBC?
 
how is it possible to simulate waveTransmissive or pressureFarField in groovyBC?
If not easy only a hint or guidance is sufficient!
Thanks.

immortality January 27, 2013 13:14

is it possible dear Bernhard?!

gschaider January 27, 2013 18:30

Quote:

Originally Posted by immortality (Post 404074)
how is it possible to simulate waveTransmissive or pressureFarField in groovyBC?
If not easy only a hint or guidance is sufficient!
Thanks.

You want to re-implement these BCs with groovyBC? Why?

Anyway: I'm not sure whether this is possible and don't have time to check the sources

immortality January 28, 2013 03:33

because i want a patch be waveTransmissive for a period of time and after that it should return to wall and after a while it becomes waveTransmissive again.
Never mind.you've helped alot so far Mr.Gschaider.thank you.

gschaider January 28, 2013 08:31

Quote:

Originally Posted by immortality (Post 404444)
because i want a patch be waveTransmissive for a period of time and after that it should return to wall and after a while it becomes waveTransmissive again.
Never mind.you've helped alot so far Mr.Gschaider.thank you.

Either you can "emulate" waveTransmissive in groovyBC (I'm not sure. Would have to look at the source for that) or you could write a new subclass to waveTransmissive that uses the groovyBC-facilities (this has been done for two BCs in groovyStandardBCs but requires some C++-knowledge)


All times are GMT -4. The time now is 15:23.