CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

"field U not existing or of wrong type" groovyBC error.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 4, 2013, 14:42
Default "field U not existing or of wrong type" groovyBC error.
  #1
Senior Member
 
immortality's Avatar
 
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,173
Rep Power: 16
immortality is on a distinguished road
hi
my BC on T is as below:
Code:
right
    {
        type            groovyBC;
        refValue        uniform 0;
        refGradient     uniform 0;
        valueFraction   uniform 1;
        value           uniform 973;
        valueExpression "((t1+c2<time()&&time()<t1+c3)||(t2+c2<time()&&time()<t2+c3)||(t3+c2<time()&&time()<t3+c3)||(t4+c2<time()&&time()<t4+c3)||(t5+c2<time()&&time()<t5+c3)||(t6+c2<time()&&time()<t6+c3)||(t7+c2<time()&&time()<t7+c3)||(t8+c2<time()&&time()<t8+c3)||(t9+c2<time()&&time()<t9+c3)||(t10+c2<time()&&time()<t10+c3)||(t11+c2<time()&&time()<t11+c3))? T0_4-(gamma-1)*magSqr(internalField(U))/(2*gamma*R) : T0_2-(gamma-1)*magSqr(internalField(U))/(2*gamma*R)";
        gradientExpression "0";
        fractionExpression "(((t1+c2<time()&&time()<t1+c3)||(t2+c2<time()&&time()<t2+c3)||(t3+c2<time()&&time()<t3+c3)||(t4+c2<time()&&time()<t4+c3)||(t5+c2<time()&&time()<t5+c3)||(t6+c2<time()&&time()<t6+c3)||(t7+c2<time()&&time()<t7+c3)||(t8+c2<time()&&time()<t8+c3)||(t9+c2<time()&&time()<t9+c3)||(t10+c2<time()&&time()<t10+c3)||(t11+c2<time()&&time()<t11+c3))||(t1<time()&&time()<t1+c1)||(t2<time()&&time()<t2+c1)||(t3<time()&&time()<t3+c1)||(t4<time()&&time()<t4+c1)||(t5<time()&&time()<t5+c1)||(t6<time()&&time()<t6+c1)||(t7<time()&&time()<t7+c1)||(t8<time()&&time()<t8+c1)||(t9<time()&&time()<t9+c1)||(t10<time()&&time()<t10+c1)||(t11<time()&&time()<t11+c1))&&(phi<=0)?1:0";
        evaluateDuringConstruction 1;
        variables       
           (

"r=0.02325;"
"rpm=32151;"
"omega=rpm*pi/30;"
"v_r=r*omega;"
"w_cell=.004;"
"n=1;"
"w_w0=n*w_cell;"
"w_w3=(21.6-0)*r*pi/180;"
"w_w4=(83-61.6)*r*pi/180;"
"w_w5=(180-128)*r*pi/180;"
"w_p2=(71.1-21.6)*r*pi/180;"
"w_p4=(129-84)*r*pi/180;"
"c1=w_p2/v_r;"
"c2=(w_p2+w_w4)/v_r;"
"c3=(w_p2+w_w4+w_p4)/v_r;"
"c4=(w_p2+w_w4+w_p4+w_w5+w_w3)/v_r;"
"t1=(w_w0+w_w3-pos().y)/v_r;"
"t2=t1+c4;"
"t3=t1+2*c4;"
"t4=t1+3*c4;"
"t5=t1+4*c4;"
"t6=t1+5*c4;"
"t7=t1+6*c4;"
"t8=t1+7*c4;"
"t9=t1+8*c4;"
"t10=t1+9*c4;"
"t11=t1+10*c4;"

"p0_2=1023382.5;"
"T0_4=973;"
"gamma=1.4;"
"R=287.14;"
)
;
        timelines       (
);
        lookuptables    (
);
    }

and this strange error displayed:
Code:
Create time

Create mesh for time = 0


PIMPLE: max iterations = 3
field "(U|k|omega)"	: relTol 0, tolerance 1e-10

Reading thermophysical properties

Selecting thermodynamics package hPsiThermo<pureMixture<constTransport<specieThermo<hConstThermo<perfectGas>>>>>
swak4Foam: Allocating new repository for sampledGlobalVariables


--> FOAM FATAL ERROR:
Parser Error at "1.373" :"field U not existing or of wrong type"
"((t1+c2<time()&&time()<t1+c3)||(t2+c2<time()&&time()<t2+c3)||(t3+c2<time()&&time()<t3+c3)||(t4+c2<time()&&time()<t4+c3)||(t5+c2<time()&&time()<t5+c3)||(t6+c2<time()&&time()<t6+c3)||(t7+c2<time()&&time()<t7+c3)||(t8+c2<time()&&time()<t8+c3)||(t9+c2<time()&&time()<t9+c3)||(t10+c2<time()&&time()<t10+c3)||(t11+c2<time()&&time()<t11+c3))? T0_4-(gamma-1)*magSqr(internalField(U))/(2*gamma*R) : T0_2-(gamma-1)*magSqr(internalField(U))/(2*gamma*R)"
"                                                                                                                                                                                                                                                                                                                                                                                     ^                                                                   "

From function parsingValue
in file lnInclude/CommonValueExpressionDriverI.H at line 802.

FOAM exiting
what may be the cause of it?
thanks for consideration.
immortality is offline   Reply With Quote

Old   February 4, 2013, 15:08
Default
  #2
Assistant Moderator
 
Bernhard Gschaider
Join Date: Mar 2009
Posts: 3,837
Rep Power: 38
gschaider will become famous soon enoughgschaider will become famous soon enough
Quote:
Originally Posted by immortality View Post
hi
my BC on T is as below:
Code:
right
    {
        type            groovyBC;
        refValue        uniform 0;
        refGradient     uniform 0;
        valueFraction   uniform 1;
        value           uniform 973;
        valueExpression "((t1+c2<time()&&time()<t1+c3)||(t2+c2<time()&&time()<t2+c3)||(t3+c2<time()&&time()<t3+c3)||(t4+c2<time()&&time()<t4+c3)||(t5+c2<time()&&time()<t5+c3)||(t6+c2<time()&&time()<t6+c3)||(t7+c2<time()&&time()<t7+c3)||(t8+c2<time()&&time()<t8+c3)||(t9+c2<time()&&time()<t9+c3)||(t10+c2<time()&&time()<t10+c3)||(t11+c2<time()&&time()<t11+c3))? T0_4-(gamma-1)*magSqr(internalField(U))/(2*gamma*R) : T0_2-(gamma-1)*magSqr(internalField(U))/(2*gamma*R)";
        gradientExpression "0";
        fractionExpression "(((t1+c2<time()&&time()<t1+c3)||(t2+c2<time()&&time()<t2+c3)||(t3+c2<time()&&time()<t3+c3)||(t4+c2<time()&&time()<t4+c3)||(t5+c2<time()&&time()<t5+c3)||(t6+c2<time()&&time()<t6+c3)||(t7+c2<time()&&time()<t7+c3)||(t8+c2<time()&&time()<t8+c3)||(t9+c2<time()&&time()<t9+c3)||(t10+c2<time()&&time()<t10+c3)||(t11+c2<time()&&time()<t11+c3))||(t1<time()&&time()<t1+c1)||(t2<time()&&time()<t2+c1)||(t3<time()&&time()<t3+c1)||(t4<time()&&time()<t4+c1)||(t5<time()&&time()<t5+c1)||(t6<time()&&time()<t6+c1)||(t7<time()&&time()<t7+c1)||(t8<time()&&time()<t8+c1)||(t9<time()&&time()<t9+c1)||(t10<time()&&time()<t10+c1)||(t11<time()&&time()<t11+c1))&&(phi<=0)?1:0";
        evaluateDuringConstruction 1;
        variables       
           (

"r=0.02325;"
"rpm=32151;"
"omega=rpm*pi/30;"
"v_r=r*omega;"
"w_cell=.004;"
"n=1;"
"w_w0=n*w_cell;"
"w_w3=(21.6-0)*r*pi/180;"
"w_w4=(83-61.6)*r*pi/180;"
"w_w5=(180-128)*r*pi/180;"
"w_p2=(71.1-21.6)*r*pi/180;"
"w_p4=(129-84)*r*pi/180;"
"c1=w_p2/v_r;"
"c2=(w_p2+w_w4)/v_r;"
"c3=(w_p2+w_w4+w_p4)/v_r;"
"c4=(w_p2+w_w4+w_p4+w_w5+w_w3)/v_r;"
"t1=(w_w0+w_w3-pos().y)/v_r;"
"t2=t1+c4;"
"t3=t1+2*c4;"
"t4=t1+3*c4;"
"t5=t1+4*c4;"
"t6=t1+5*c4;"
"t7=t1+6*c4;"
"t8=t1+7*c4;"
"t9=t1+8*c4;"
"t10=t1+9*c4;"
"t11=t1+10*c4;"

"p0_2=1023382.5;"
"T0_4=973;"
"gamma=1.4;"
"R=287.14;"
)
;
        timelines       (
);
        lookuptables    (
);
    }

and this strange error displayed:
Code:
Create time

Create mesh for time = 0


PIMPLE: max iterations = 3
field "(U|k|omega)"	: relTol 0, tolerance 1e-10

Reading thermophysical properties

Selecting thermodynamics package hPsiThermo<pureMixture<constTransport<specieThermo<hConstThermo<perfectGas>>>>>
swak4Foam: Allocating new repository for sampledGlobalVariables


--> FOAM FATAL ERROR:
Parser Error at "1.373" :"field U not existing or of wrong type"
"((t1+c2<time()&&time()<t1+c3)||(t2+c2<time()&&time()<t2+c3)||(t3+c2<time()&&time()<t3+c3)||(t4+c2<time()&&time()<t4+c3)||(t5+c2<time()&&time()<t5+c3)||(t6+c2<time()&&time()<t6+c3)||(t7+c2<time()&&time()<t7+c3)||(t8+c2<time()&&time()<t8+c3)||(t9+c2<time()&&time()<t9+c3)||(t10+c2<time()&&time()<t10+c3)||(t11+c2<time()&&time()<t11+c3))? T0_4-(gamma-1)*magSqr(internalField(U))/(2*gamma*R) : T0_2-(gamma-1)*magSqr(internalField(U))/(2*gamma*R)"
"                                                                                                                                                                                                                                                                                                                                                                                     ^                                                                   "

From function parsingValue
in file lnInclude/CommonValueExpressionDriverI.H at line 802.

FOAM exiting
what may be the cause of it?
thanks for consideration.
You're using "evaluateDuringConstruction". At the time when this field is created U has not been created and will therefor not be found.

Exactly because of this type of dependency evaluateDuringConstruction is NOT set by default. Switch it off
__________________
Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request
gschaider is online now   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Undeclared Identifier Errof UDF SteveGoat Fluent UDF and Scheme Programming 7 October 15, 2014 07:11
Native ParaView Reader Bugs tj22 OpenFOAM Paraview & paraFoam 265 September 16, 2014 10:19
Building OpenFOAM1.7.0 from source ata OpenFOAM Installation 42 May 14, 2012 20:48
Problem running perturbUCyl sen.1986 OpenFOAM 14 March 23, 2012 05:12
checking the system setup and Qt version vivek070176 OpenFOAM Installation 22 June 1, 2010 12:34


All times are GMT -4. The time now is 14:36.