CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

GAMG and AMI: HELP!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 16, 2013, 00:27
Default GAMG and AMI: HELP!
  #1
New Member
 
Santiago Lopez Castano
Join Date: Nov 2012
Posts: 12
Rep Power: 3
Santiago is on a distinguished road
Hi Guys!

So I've been trying to run a case using the GAMG solver
and at the same time i have several AMI interfaces over my domain.
When I send the case, this is what I get:
Code:
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.1.1                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.1.1-221db2718bbb
Exec   : potentialFoam -noFunctionObjects
Date   : Mar 15 2013
Time   : 23:15:27
Host   : "sc.iihr.uiowa.edu"
PID    : 27996
Case   : /home/slopezcastano/porousE4_1
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time
Create mesh for time = 0
Reading field p
Reading field U
AMI: Creating addressing and weights between 7242 source faces and 8262 target faces
AMI: Patch source weights min/max/average = 0.664996, 1.00091, 0.999799
AMI: Patch target weights min/max/average = 0.867808, 1.00285, 1
Calculating potential flow

--> FOAM FATAL ERROR: 
Size mismatch.
Source patch size:3621
Source agglomeration size:1820
Target patch size:4131
Target agglomeration size:2073
    From function AMIInterpolation<SourcePatch, TargetPatch>::AMIInterpolation
(
    const AMIInterpolation<SourcePatch, TargetPatch>&,
    const label,
    const labelList&
)
    in file lnInclude/AMIInterpolation.C at line 1622.
FOAM exiting
I assume is some kind of problem with the GAMG solver since
I sent the simulation using PBiCG and is running fine. If somebody
could give me a hint about this problem I'd greatly appreciate it.

Regards,

Santiago
Santiago is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Foam::error::PrintStack almir OpenFOAM Running, Solving & CFD 48 October 22, 2014 08:19
Trouble with simple AMI case Horus OpenFOAM 0 February 26, 2013 09:31
AMI speed performance danny123 OpenFOAM 19 October 24, 2012 07:44
MRFSimpleFoam wind turbine case continuity error ysh1227 OpenFOAM Running, Solving & CFD 0 May 23, 2012 05:26
MRFSimpleFoam wind turbine case diverges ysh1227 OpenFOAM Running, Solving & CFD 0 May 22, 2012 08:59


All times are GMT -4. The time now is 22:37.