CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Geometry problem!! (http://www.cfd-online.com/Forums/openfoam-solving/115647-geometry-problem.html)

Grimoli April 3, 2013 22:13

Geometry problem!!
 
Hey guys,im simulating a sink(waster),and im getting a problem at the geometry(it runs alright but when i open paraview it closes automatically)What should I do??

My makeCellSets.set

cellSet heater new boxToCell (0 0 10)(100 100 30)
cellSet heater add boxToCell (0 0 30)(100 10 40)
cellSet heater add boxToCell (0 30 30)(100 40 40)
cellSet heater add boxToCell (0 60 30)(100 70 40)
cellSet heater add boxToCell (0 90 30)(100 100 40)
cellZoneSet heater new setToCellZone heater
cellSet Solid new boxToCell (0 0 0)(100 100 10)
cellZoneSet Solid new setToCellZone Solid
cellSet Air new boxToCell (0 0 40)(100 100 80)
cellSet Air add boxToCell (0 10 40)(100 30 30)
cellSet Air add boxToCell (0 40 40)(100 60 30)
cellSet Air add boxToCell (0 70 40)(100 90 30)
cellZoneSet Air new setToCellZone Air

My blockMesh

/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 2.1.1 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
object blockMeshDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

convertToMeters 1;

vertices
(
(0 0 0)
(100 0 0)
(100 100 0)
(0 100 0)
(0 0 80)
(100 0 80)
(100 100 80)
(0 100 80)
);

blocks
(
hex (0 1 2 3 4 5 6 7) (30 10 10) simpleGrading (1 1 1)
);

edges
(
);

boundary
(
maxY
{
type wall;
faces
(
(3 7 6 2)
);
}
minX
{
type patch;
faces
(
(0 4 7 3)
);
}
maxX
{
type patch;
faces
(
(2 6 5 1)
);
}
minY
{
type wall;
faces
(
(1 5 4 0)
);
}
minZ
{
type wall;
faces
(
(0 3 2 1)
);
}
maxZ
{
type wall;
faces
(
(4 5 6 7)
);
}
);

mergePatchPairs
(
);

// ************************************************** *********************** //

Grimoli April 3, 2013 22:40

Please someone help me =(

startingWithCFD April 4, 2013 03:17

Is there an error message in the console when paraview shuts down?


All times are GMT -4. The time now is 18:20.