CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   problem with time and velocity data table (interdymfoam) (http://www.cfd-online.com/Forums/openfoam-solving/118239-problem-time-velocity-data-table-interdymfoam.html)

ramin3615 May 23, 2013 08:18

problem with time and velocity data table (interdymfoam)
 
Hello all

I am using interdymfoam (openfoam 2.1.1) in order to model a kind of seashore wave in a wave maker so i have used a moving wall as a piston like a wave maker.
I have time vs velocity data in each time step but not the velocity function,in fact the function has made of a bunch of functions itself so i can't use groovyBC or wave2Foam boundary condition .i want to use uniformFixedValue BC for that like what is shown in below address
http://www.openfoam.org/version2.1.0...conditions.php

i have inserted only pointMotionUx and U file for this case so for moving wall pointMotionUx is like this

Quote:

moving wall
{
type uniformFixedValue
uniformValue table
(
( 0 0.0)
(100 10.0)
);
}
and for U:

Quote:

moving wall
{
type uniformFixedValue
uniformValue table
(
( 0 (0 0 0))
(100 (10.0 0 0))
);
}
I have tried all uniformFixedValue types in that address but i get this error every time.

Quote:

Create time

Create mesh for time = 0

Selecting dynamicFvMesh dynamicMotionSolverFvMesh
Selecting motion solver: velocityLaplacian


--> FOAM FATAL IO ERROR:
cannot find file

file: /home/ramin/new/0/pointMotionU at line 0.

From function regIOobject::readStream()
in file db/regIOobject/regIOobjectRead.C at line 73.
I wish you could help me to find what the problem is.
Thanks.
Ramin


All times are GMT -4. The time now is 05:53.