CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

which boundary condition for a flux of turbulence?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 12, 2013, 10:15
Default which boundary condition for a flux of turbulence?
  #1
Senior Member
 
Elo´se
Join Date: Jul 2012
Location: Trondheim, Norway
Posts: 104
Rep Power: 5
Eloise is on a distinguished road
Hello,

In my simulations (simpleFoam, k-epsilon), I need to have a flux of epsilon through one of the boundaries. I couldn't find an appropriate boundary condition type for this case.
Does someone has something to recommend or should I modify the turbulentHeatFluxTemperature library (and replace the heat with the turbulence value)?

Thanks for your input!
Elo´se
Eloise is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mixed inflow/outflow downstream boundary condition question peob OpenFOAM Running, Solving & CFD 2 August 14, 2014 09:07
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Implement constant heat flux boundary condition new_at_this Main CFD Forum 2 April 6, 2012 23:35
How to set the Heat Flux boundary condition at Outlet creddy_trddc CFX 3 September 21, 2011 07:44
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 15:55.