CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

How to map flow flux?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 21, 2013, 06:10
Default How to map flow flux?
  #1
Member
 
Hale
Join Date: May 2013
Posts: 53
Rep Power: 4
Hale is on a distinguished road
Hi there,

I am wondering if its possible to map flow flux from two boundaries (one with water and the other with air) to another boundary which is the outlet in my case!

Any ideas/suggestions would be greatly appreciated.

Best regards
Hale
Hale is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about heat transfer coefficient setting for CFX Anna Tian CFX 1 June 16, 2013 06:28
Boudaries for bouynat driven flow with additional mass flux at inlet Charon CFX 2 April 27, 2013 08:02
Modeling the flow of solar radiation as the heat flux from the surface. Gebbels FLUENT 0 March 25, 2012 14:39
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07


All times are GMT -4. The time now is 21:15.