CFD Online Discussion Forums - dam break having problem using setfields

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Running, Solving & CFD (https://www.cfd-online.com/Forums/openfoam-solving/)

- - dam break having problem using setfields (https://www.cfd-online.com/Forums/openfoam-solving/119944-dam-break-having-problem-using-setfields.html)

subhsngh

June 27, 2013 07:09

dam break having problem using setfields

1 Attachment(s)

i am having problem when i give command setfields to the dambreak and run parafoam the result appears as it is fully occupied by water.whole control volume is shown in red

subhsngh

June 27, 2013 08:31

got the solution need to check the alpha1 not u in simulation

All times are GMT -4. The time now is 07:18.