[aerogt3]

Hey all, I cannot get a single iteration to run in rhoSimpleFoam. I copied the boundary conditions and transportProperties from the tutorial below, but it still won't run!

/opt/OpenFOAM/OpenFOAM-2.2.x/tutorials/compressible/rhoSimpleFoam/angledDuctExplicitFixedCoeff

Here are the errors. Any ideas what it could be? I have tried changing BC's, changing transport models, etc. Nothing works! I am using the exact thermophysicalProperties file from the tutorial!

Reading thermophysical properties

Selecting thermodynamics package hePsiThermo<pureMixture<sutherland<hConst<perfectGas<specie>>,sensibleEnthalpy>>>
[3] #0  Foam::error::printStack(Foam::Ostream&)[9] #0  Foam::error::printStack(Foam::Ostream&)--------------------------------------------------------------------------
An MPI process has executed an operation involving a call to the
"fork()" system call to create a child process.  Open MPI is currently
operating in a condition that could result in memory corruption or
other system errors; your MPI job may hang, crash, or produce silent
data corruption.  The use of fork() (or system() or other calls that
create child processes) is strongly discouraged.

The process that invoked fork was:

Local host:          dell-ws02.hwa.local (PID 10743)
MPI_COMM_WORLD rank: 7

If you are *absolutely sure* that your application will successfully
and correctly survive a call to fork(), you may disable this warning
by setting the mpi_warn_on_fork MCA parameter to 0.
--------------------------------------------------------------------------
[0] #0  Foam::error::printStack(Foam::Ostream&)[1] #0  Foam::error::printStack(Foam::Ostream&)[2] #0  Foam::error::printStack(Foam::Ostream&)[4] #0  Foam::error::printStack(Foam::Ostream&)[5] #0  Foam::error::printStack(Foam::Ostream&)[6] #0  Foam::error::printStack(Foam::Ostream&)[7] #0  Foam::error::printStack(Foam::Ostream&)[8] #0  Foam::error::printStack(Foam::Ostream&)[10] #0  Foam::error::printStack(Foam::Ostream&)[11] #0  Foam::error::printStack(Foam::Ostream&)[12] #0  Foam::error::printStack(Foam::Ostream&)[13] #0  Foam::error::printStack(Foam::Ostream&)[14] #0  Foam::error::printStack(Foam::Ostream&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[14] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[9] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[2] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[4] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[5] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[6] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[7] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[3] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[8] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[10] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[11] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[12] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[13] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[1] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[0] #1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[2] #2
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[5] #2
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platform in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so" in "/opt/OpenFOAM/OpenFOAM-2.2.x/platfos/linux64GccDPOpt/lib/libOpenFOAM.so"

[7] #2  rms/linux64GccDPOpt/lib/libOpenFOAM[4] #2
.so"
[6] #2

in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[3] #2
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[8] #2
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[10] #2
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM. in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[12] #2
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[13] #2
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[9] #2
[14] #2
[1] #2
so"

[0] #2
[2]  at sigaction.c:0
[2] #3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()[6]  at sigaction.c:0
[6] #3  [4]  at sigaction.c:0
[7]  at sigaction.c:0
[7] #Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()[5]  at sigaction.c:0
[5] #3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()[4] #3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()[3]  at sigaction.c:0
[3] #3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()[1]  at sigaction.c:0
[1] #3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()[8]  at sigaction.c:0
[8] #3  [10]  at sigaction.c:0
[10] #3  [14]  at sigaction.c:0
[14] #3  [12]  at sigaction.c:0
[12] #3  [13]  at sigaction.c:0
[13] #3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()[0]  at sigaction.c:0
[0] #3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()[9]  at sigaction.c:0
[9] #3  [11]  at sigaction.c:0
[11] #3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate()Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate() in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[2] #4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::hePsiThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[6] #4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::hePsiThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[4] #4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::hePsiThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDP[7] #4  Opt/lib/libfluidThermophysicalModels.so"
[5] #4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::hePsiThermo(Foam::fvMesh const&, Foam::word const&)Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::hePsiThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[1] #4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::hePsiThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[3] #4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::hePsiThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[0] #4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::hePsiThermo(Foam::fvMesh const&, Foam::word const&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/lin in "/opt/OpenFOAM/OpenFOAM-2.2.x/platf in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/li in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccD in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/ in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/ in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidTh in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[12] #4  ux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[8] #4  orms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[14] #4  nux64GccDPOpt/lib/libfluidThermophysicalModels.so"
[10] #4  POpt/lib/libfluidThermophysicalModels.so"
[9] #4  libfluidThermophysicalModels.so"
[2] #5  libfluidThermophysicalModels.so"
[13] #4  ermophysicalModels.so"

My initial conditions are:

epsilon: 6.9 for epsilon on all walls and freestream, compressible::epsilonWallFunction, fixed value inlet, zero grad outlet
k: same as above, but 0.015 as the value and compressible::kqRWallFunction
T: fixedValue at inlet, zeroGrad everywhere else.
Pressure:

dimensions [ 1 -1 -2 0 0 0 0 ];

internalField uniform 101325;

boundaryField
{
 velocityinlet
  {
    type totalPressure;
    gamma 1.4;
    p0 uniform 102856.25;
  }
  pressureoutlet
  {
    type fixedValue;
    value $internalField;
  }

Velocity:

dimensions [ 0 1 -1 0 0 0 0 ];

internalField uniform ( 0 0 0 );

boundaryField
{
  velocityinlet
  {
    type pressureInletVelocity;
    value uniform ( 0 0 0 );
  }
  pressureoutlet
  {
    type zeroGradient;
  }

[aerogt3]

Interestingly, the case will run 1 iteration before blowing up when run in serial.....but I still have no idea why!

Selecting thermodynamics package hePsiThermo<pureMixture<sutherland<hConst<perfectGas<specie>>,sensibleEnthalpy>>>
Reading field U

Reading/calculating face flux field phi

Creating turbulence model

Selecting RAS turbulence model realizableKE
realizableKECoeffs
{
Cmu             0.09;
A0              4;
C2              1.9;
sigmak          1;
sigmaEps        1.2;
Prt             1;
}

No finite volume options present


Starting time loop

Time = 1

DILUPBiCG:  Solving for Ux, Initial residual = 1, Final residual = 0.00047227, No Iterations 1
DILUPBiCG:  Solving for Uy, Initial residual = 1.06996e-13, Final residual = 1.06996e-13, No Iterations 0
DILUPBiCG:  Solving for Uz, Initial residual = 0.999834, Final residual = 0.00119021, No Iterations 1
DILUPBiCG:  Solving for h, Initial residual = 1.29473e-05, Final residual = 1.06133e-07, No Iterations 1
GAMG:  Solving for p, Initial residual = 1, Final residual = 0.00507569, No Iterations 2
time step continuity errors : sum local = 348.194, global = -177.004, cumulative = -177.004
rho max/min : 1.21956 1.20141
ExecutionTime = 2.44 s  ClockTime = 2 s

Time = 2

DILUPBiCG:  Solving for Ux, Initial residual = 0.0123603, Final residual = 2.18858e-05, No Iterations 1
DILUPBiCG:  Solving for Uy, Initial residual = 0.0441758, Final residual = 0.000528528, No Iterations 1
DILUPBiCG:  Solving for Uz, Initial residual = 0.0365402, Final residual = 0.000264662, No Iterations 1
DILUPBiCG:  Solving for h, Initial residual = 1, Final residual = 0.000391816, No Iterations 1
#0  Foam::error::printStack(Foam::Ostream&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2
at sigaction.c:0
#3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate() in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::correct() in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#5
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/bin/rhoSimpleFoam"
#6  __libc_start_main in "/lib64/libc.so.6"
#7
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/bin/rhoSimpleFoam"
File cleanup

[Sherlock_1812]

Hi,

I am having a similar error. Have you found a solution to it yet?

[DeepIndia]

Originally Posted by aerogt3

Interestingly, the case will run 1 iteration before blowing up when run in serial.....but I still have no idea why!

Selecting thermodynamics package hePsiThermo<pureMixture<sutherland<hConst<perfectGas<specie>>,sensibleEnthalpy>>>
Reading field U

Reading/calculating face flux field phi

Creating turbulence model

Selecting RAS turbulence model realizableKE
realizableKECoeffs
{
Cmu             0.09;
A0              4;
C2              1.9;
sigmak          1;
sigmaEps        1.2;
Prt             1;
}

No finite volume options present


Starting time loop

Time = 1

DILUPBiCG:  Solving for Ux, Initial residual = 1, Final residual = 0.00047227, No Iterations 1
DILUPBiCG:  Solving for Uy, Initial residual = 1.06996e-13, Final residual = 1.06996e-13, No Iterations 0
DILUPBiCG:  Solving for Uz, Initial residual = 0.999834, Final residual = 0.00119021, No Iterations 1
DILUPBiCG:  Solving for h, Initial residual = 1.29473e-05, Final residual = 1.06133e-07, No Iterations 1
GAMG:  Solving for p, Initial residual = 1, Final residual = 0.00507569, No Iterations 2
time step continuity errors : sum local = 348.194, global = -177.004, cumulative = -177.004
rho max/min : 1.21956 1.20141
ExecutionTime = 2.44 s  ClockTime = 2 s

Time = 2

DILUPBiCG:  Solving for Ux, Initial residual = 0.0123603, Final residual = 2.18858e-05, No Iterations 1
DILUPBiCG:  Solving for Uy, Initial residual = 0.0441758, Final residual = 0.000528528, No Iterations 1
DILUPBiCG:  Solving for Uz, Initial residual = 0.0365402, Final residual = 0.000264662, No Iterations 1
DILUPBiCG:  Solving for h, Initial residual = 1, Final residual = 0.000391816, No Iterations 1
#0  Foam::error::printStack(Foam::Ostream&) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1  Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2
at sigaction.c:0
#3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::calculate() in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleEnthalpy> > > >::correct() in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/lib/libfluidThermophysicalModels.so"
#5
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/bin/rhoSimpleFoam"
#6  __libc_start_main in "/lib64/libc.so.6"
#7
in "/opt/OpenFOAM/OpenFOAM-2.2.x/platforms/linux64GccDPOpt/bin/rhoSimpleFoam"
File cleanup

Hi Man,
Hoe did you find the soultion , i have the same error?