CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Divergence problem in interpasechangefoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 21, 2014, 06:55
Default Divergence problem in interpasechangefoam
  #1
Senior Member
 
Baris (Heewa)
Join Date: Jan 2013
Location: Japan
Posts: 130
Rep Power: 13
shipman is on a distinguished road
Hi to all,

I am trying to simulate cavitation inside of nozzle. It is turbulent flow, used RNG k-epsilon turbulence model. My nozzle shape is attached. Upside is inlet (wider one) down side is outlet. I am using interphasechangeFoam ver2.1.1. I have just done following modification in U.Eqn to decrease the calculate nut as indicated in the paper of Coutier Delgosha (2003).

Code:
 dimensionedScalar rhoUnit("rhoUnit", dimDensity, 1.0);

   surfaceScalarField muEff
    (
        "muEff",
        twoPhaseProperties->muf()
      + fvc::interpolate((Foam::pow((0.017-rho/rhoUnit),5)/Foam::pow((0.017-998),5)*(998-0.017)+ 0.017)*rho*turbulence->nut())
    );
I set the my BCs:

0/U
inlet ==> FixedValue
HTML Code:
outlet= intletOutlet and tried pressureInletOutletVelocity;
0/p_rgh
HTML Code:
inlet ==> zeroGradient
Outlet==> fixedValues ==>1e5, 1e4...0 (gradully decreased until 0)
and also for outlet i tried: fixedMeanValue
0/k-epsilon
HTML Code:
inlet ==>fixedValue
outlet ==> tried fixedValue and inletOutlet
wall ==>tried epsilonWallFunction/kqRWallFunction and zerogradient
0/nut
HTML Code:
inlet/outlet ==>calculated
wall==>nutkWallFunction
fvschemes
HTML Code:
divSchemes
div(rhoPhi,U) Gauss linear;
div(phi,epsilon) Gauss upwind;
div(phi,k) Gauss upwind;
div(phi,alpha) Gauss vanLeer;
div(phirb,alpha) Gauss interfaceCompression;

laplacianSchemes
{
default Gauss linear corrected;
}
snGradSchemes
{
default none;
snGrad(pd) limited 0.5;
snGrad(rho) limited 0.5;
snGrad(alpha1) limited 0.5;
}

fluxRequired
{
default none;
p_rgh;
pcorr;
alpha1;
}
fv.solution==>everything is same with tutorial only added:
HTML Code:
relaxationFactors
{
fields
{
}
equations
{
"U.*" 0.7;
"k.*" 0.5;
"epsilon.*" 0.5;
"p_rgh.*" 0.3;
}
==>>maxCo 0.5; I set deltaT as 10-7, 10-8.

Although i tried different BCS as indicated above always deltaT reached very low valuse and gave divergence floating point error as follows:

HTML Code:
GAMG:  Solving for p_rgh, Initial residual = 9.10213e-09, Final residual = 9.10213e-09, No Iterations 0
GAMG:  Solving for p_rgh, Initial residual = 9.10213e-09, Final residual = 9.10213e-09, No Iterations 0
time step continuity errors : sum local = 2.80061e+06, global = -4.94029e-10, cumulative = 0.00804153
GAMG:  Solving for p_rgh, Initial residual = 1.20034e-08, Final residual = 9.50047e-10, No Iterations 1
GAMGPCG:  Solving for p_rgh, Initial residual = 4.32284e-15, Final residual = 4.32284e-15, No Iterations 0
time step continuity errors : sum local = 994878, global = -2.11248e-10, cumulative = 0.00804153
PIMPLE: not converged within 50 iterations
ExecutionTime = 1974.23 s  ClockTime = 2002 s

Courant Number mean: 6.58573e+06 max: 2.47105e+13
deltaT = 2.17834e-30
--> FOAM Warning : 
    From function Time::operator++()
    in file db/Time/Time.C at line 1010
    Increased the timePrecision from 8 to 9 to distinguish between timeNames at time 6.97175e-05
Time = 6.97175051e-05

[11] #0  Foam::error::printStack(Foam::Ostream&)[3] #0  Foam::error::printStack(Foam::Ostream&)[7] #0  Foam::error::printStack(Foam::Ostream&)[6] #0  Foam::error::printStack(Foam::Ostream&)[10] #0  Foam::error::printStack(Foam::Ostream&)[9] #0  Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[3] #1  Foam::sigFpe::sigHandler(int)[2] #0  Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[7] #1  Foam::sigFpe::sigHandler(int) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[11] #1  Foam::sigFpe::sigHandler(int)[4] #0  Foam::error::printStack(Foam::Ostream&)[5] #0  Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[9] #1  Foam::sigFpe::sigHandler(int) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[10] #1  Foam::sigFpe::sigHandler(int) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[7] #2   in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[2] #1  Foam::sigFpe::sigHandler(int) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[3] #2  [0] #0  Foam::error::printStack(Foam::Ostream&)[1] #0  Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[4] #1  Foam::sigFpe::sigHandler(int) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[5] #1  Foam::sigFpe::sigHandler(int) in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[9] #2   in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[11] #2   in "/lib/libc.so.6"
[3] #3   in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[10] #2  [8] #0  Foam::error::printStack(Foam::Ostream&) in "/lib/libc.so.6"
[7] #3   in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[6] #1  Foam::sigFpe::sigHandler(int) in "/lib/libc.so.6"
[11] #3   in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[2] #2   in "/lib/libc.so.6"
[9] #3   in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libO in "/opt/openfoam211/platforms/penFOAM.so"
[0] #1  linux64GccDPOpt/lib/libOpenFOAM.so"
Foam::sigFpe::sigHandler(int)[1] #1  Foam::sigFpe::sigHandler(int)
 in "/lib/libc.so.6"
[10] #3   in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[5] #2  
 in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[4] #2  

 in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[8] #1  Foam::sigFpe::sigHandler(int) in "/lib/libc.so.6"
[2] #3  
[7]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[7] #4  [3]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[3] #4  [11]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[11] #4   in "/lib/libc.so.6"
[5] #3   in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[6] #2   in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[1] #2   in "/lib/ in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[0] #2  libc.so.6"
[4] #3  

[10]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[10] #4  
 in "/lib/libc.so.6"
[1] #3  
 in "/opt/openfoam211/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
[8] #2   in "/lib/libc.so.6"
[0] #3  [2]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[2] #4  [11]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[11] #5  [9]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[9] #4  
 in "/lib/libc.so.6"
[6] #3  [3]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[3] #5  
[4]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[4] #4  [7]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[7] #5   in "/lib/libc.so.6"
[8] #3  

[5]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[5] #4  
[9]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[9] #5  [11]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[11] #6  __libc_start_main[0]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[0] #4  [1]  in "/home/yusuke/OpenFOAM/yusuke-2.1[3]  in "/home/yusuke/OpenFOAM/yusuke.1/platforms/linux64GccDPOpt/bin/RNGinterP-2.1.1/platforms/linux64GccDPOpt/bin/RhaseChangeFoam"
NGinterPhaseChangeFoam"
[1] #4  [3] #6  __libc_start_main
[2]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[2] #5  
[6]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[6] #4  [10]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[10] #5   in "/lib/libc.so.6"
[11] #7  

[7]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[7] #6  __libc_start_main

 in "/lib/libc.so.6"
[3] #7  
[4]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[4] #5  [9]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[9] #6  __libc_start_main[6]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[6] #5   in "/lib/libc.so.6"
[7] #7  
[1]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[1] #5  [2]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[2] #6  __libc_start_main
[10]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[10] #6  __libc_start_main[5]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[5] #5  
[8]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[8] #4  
 in "/lib/libc.so.6"
[2] #7  

[11]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[VENUS:26554] *** Process received signal ***
[VENUS:26554] Signal: Floating point exception (8)
[VENUS:26554] Signal code:  (-6)
[VENUS:26554] Failing at address: 0x3e8000067ba
[VENUS:26554] [ 0] /lib/libc.so.6(+0x33af0) [0x7f17f47d3af0]
[VENUS:26554] [ 1] /lib/libc.so.6(gsignal+0x35) [0x7f17f47d3a75]
[VENUS:26554] [ 2] /lib/libc.so.6(+0x33af0) [0x7f17f47d3af0]
[VENUS:26554] [ 3] RNGinterPhaseChangeFoam() [0x4a8442]
[VENUS:26554] [ 4] RNGinterPhaseChangeFoam() [0x4b74fd]
[VENUS:26554] [ 5] RNGinterPhaseChangeFoam() [0x435358]
[VENUS:26554] [ 6] /lib/libc.so.6(__libc_start_main+0xfd) [0x7f17f47bec4d]
[VENUS:26554] [ 7] RNGinterPhaseChangeFoam() [0x42b849]
[VENUS:26554] *** End of error message ***
 in "/lib/libc.so.6"
[10] #7  [0]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[0] #5   in "/lib/libc.so.6"
[9] #7  [3]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[VENUS:26546] *** Process received signal ***
[VENUS:26546] Signal: Floating point exception (8)
[VENUS:26546] Signal code:  (-6)
[VENUS:26546] Failing at address: 0x3e8000067b2
[VENUS:26546] [ 0] /lib/libc.so.6(+0x33af0) [0x7ff896532af0]
[VENUS:26546] [ 1] /lib/libc.so.6(gsignal+0x35) [0x7ff896532a75]
[VENUS:26546] [ 2] /lib/libc.so.6(+0x33af0) [0x7ff896532af0]
[VENUS:26546] [ 3] RNGinterPhaseChangeFoam() [0x4a8483]
[VENUS:26546] [ 4] RNGinterPhaseChangeFoam() [0x4b74fd]
[VENUS:26546] [ 5] RNGinterPhaseChangeFoam() [0x435358]
[VENUS:26546] [ 6] /lib/libc.so.6(__libc_start_main+0xfd) [0x7ff89651dc4d]
[VENUS:26546] [ 7] RNGinterPhaseChangeFoam() [0x42b849]
[VENUS:26546] *** End of error message ***
[1]  in "/home/yusuke/OpenFOAM/yusuke-2.1.1/platforms/linux64GccDPOpt/bin/RNGinterPhaseChangeFoam"
[1] #6  __libc_start_main
And, finally when i viewed the result of P_rgh and U as you can see left side of the small throat entrance always obtained strange high velocity and very high inlet pressure.

I dont know what i can do .Please can someone guide and tell me some new ways..

Thanks in advance.

B
Attached Images
File Type: jpg P.jpg (51.6 KB, 16 views)
File Type: jpg U_vec.jpg (72.6 KB, 14 views)
File Type: jpg U_vec2.jpg (96.0 KB, 12 views)
shipman is offline   Reply With Quote

Old   March 22, 2014, 04:40
Default
  #2
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Greetings Baris,

After a very quick read and looking at the images, my guess is that the problem is related to a bad mesh or due to insufficient resolution or big changes in resolution near the wall.

To understand what I mean, have a look into this blog post of mine: OpenFOAM: Interesting cases of bad meshes and bad initial conditions

Best regards,
Bruno
__________________
wyldckat is offline   Reply With Quote

Old   March 22, 2014, 05:26
Default hi
  #3
Senior Member
 
Baris (Heewa)
Join Date: Jan 2013
Location: Japan
Posts: 130
Rep Power: 13
shipman is on a distinguished road
Dear Bruno,

Thanks so much for your reply.

About mesh, i checked it that seems OK as follows:

HTML Code:
Mesh stats
    points:           654382
    faces:            1596014
    internal faces:   1412748
    cells:            471322
    boundary patches: 3
    point zones:      0
    face zones:       0
    cell zones:       0

Overall number of cells of each type:
    hexahedra:     410213
    prisms:        0
    wedges:        0
    pyramids:      0
    tet wedges:    0
    tetrahedra:    0
    polyhedra:     61109

Checking topology...
    Boundary definition OK.
    Cell to face addressing OK.
    Point usage OK.
    Upper triangular ordering OK.
    Face vertices OK.
    Topological cell zip-up check OK.
    Face-face connectivity OK.
    Number of regions: 1 (OK).

Checking patch topology for multiply connected surfaces ...
    Patch               Faces    Points   Surface topology                   Bounding box
    wall                182766   183793   ok (non-closed singly connected)   (-0.006 -0.008 -2.71051e-20) (0.00194 0.007 0.00194)
    outlet              100      121      ok (non-closed singly connected)   (0 -0.008 0) (0.00194 -0.008 0.00194)
    inlet               400      451      ok (non-closed singly connected)   (-0.006 0.007 0) (0.00194 0.007 0.00194)

Checking geometry...
    Overall domain bounding box (-0.006 -0.008 -2.71051e-20) (0.00194 0.007 0.00194)
    Mesh (non-empty, non-wedge) directions (1 1 1)
    Mesh (non-empty) directions (1 1 1)
    Boundary openness (2.22526e-14 -1.42534e-17 -2.50737e-15) OK.
    Max cell openness = 2.06795e-16 OK.
    Max aspect ratio = 2.5 OK.
    Minumum face area = 3.75e-11. Maximum face area = 1.6e-07.  Face area magnitudes OK.
    Min volume = 7.03125e-16. Max volume = 6.4e-11.  Total volume = 1.37934e-07.  Cell volumes OK.
    Mesh non-orthogonality Max: 29.0546 average: 10.3431
    Non-orthogonality check OK.
    Face pyramids OK.
    Max skewness = 1.6129 OK.
    Coupled point location match (average 0) OK.
    Face tets OK.
    Min/max edge length = 5e-06 0.0004 OK.
    All angles in faces OK.
    Face flatness (1 = flat, 0 = butterfly) : average = 1  min = 1
    All face flatness OK.
    Cell determinant (wellposedness) : minimum: 0.821136 average: 13.565
    Cell determinant check OK.
About insufficient resolution or big changes in resolution near the wall, i will read your thread and let you know situation.

Thanks.

B.
shipman is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Divergence problem Smaras FLUENT 13 February 21, 2013 06:03
Meshing and divergence problem ghost FLUENT 9 February 5, 2010 13:24
divergence problem vincent FLUENT 3 August 3, 2006 16:44
strange divergence when solving multiphase problem tanghao FLUENT 2 July 27, 2006 20:47
divergence problem Ayyappan.T FLUENT 2 May 16, 2005 13:10


All times are GMT -4. The time now is 21:02.