CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

Using chtMultiRegionSimpleFoam with a model imported from enGrids

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 11, 2014, 06:38
Default Using chtMultiRegionSimpleFoam with a model imported from enGrids
  #1
Member
 
Join Date: Oct 2014
Posts: 42
Rep Power: 3
Wien3 is on a distinguished road
Good Morning!
As the title says, I want to use that solver but using my model from enGrids. I have achieved to make it work but creating the model from blockMeshDict "by hand" (I attach it).
Do you know what files should I change/add/delete for my purpose?

I have been searching for some information about it. The only thing I found is this tutorial, but there is no explanation and, from my point of view, the topoSetDict is wrong, because it belongs to other tutorial (heatexchanger), so it doesn't help too much.

Thank you in advance!
Attached Files
File Type: zip cube3D_cht.zip (28.1 KB, 0 views)
Wien3 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Atomization and Breakup model xck1986 OpenFOAM 4 May 31, 2014 04:43
problem with solving lagrange reaction cloud Polli OpenFOAM Running, Solving & CFD 0 April 30, 2014 07:53
manualInjection model in sprayFoam Mentalo OpenFOAM Running, Solving & CFD 1 April 2, 2014 09:29
Mixture model + VOF? blacksoil2012 Fluent Multiphase 2 February 9, 2014 00:59
Problems bout CFD model of biomass gasification, Downdraft gasifier wanglong FLUENT 2 November 26, 2009 00:27


All times are GMT -4. The time now is 17:46.