CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

error:Killed during interFOAM simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 9, 2015, 01:41
Post error:Killed during interFOAM simulation
  #1
New Member
 
Join Date: Mar 2015
Posts: 15
Rep Power: 2
Sam_CFD is on a distinguished road
Dear Foamers,

I am simulating an injector with interFOAM. I got the following error.

Code:
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.3.1                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.3.1-262087cdf8db
Exec   : interFoam
Date   : Jun 08 2015
Time   : 19:59:46
Host   : "KOR1031100VM"
PID    : 17288
Case   : /home/sml7kor/OpenFOAM/sml7kor-2.3.1/run/HDEV_5_FinetoCoarse_Test
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0


PIMPLE: Operating solver in PISO mode

Reading field p_rgh

Reading field U

Reading/calculating face flux field phi

Reading transportProperties

Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Selecting turbulence model type RASModel
Selecting RAS turbulence model kOmegaSST
Killed
sml7kor@KOR1031100VM:~/OpenFOAM/sml7kor-2.3.1/run/HDEV_5_FinetoCoarse_Test$ interFoam 
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.3.1                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.3.1-262087cdf8db
Exec   : interFoam
Date   : Jun 08 2015
Time   : 20:01:56
Host   : "KOR1031100VM"
PID    : 17310
Case   : /home/sml7kor/OpenFOAM/sml7kor-2.3.1/run/HDEV_5_FinetoCoarse_Test
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0


PIMPLE: Operating solver in PISO mode

Reading field p_rgh

Reading field U

Reading/calculating face flux field phi

Reading transportProperties

Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Selecting turbulence model type RASModel
Selecting RAS turbulence model kOmegaSST
Killed
Please help me to address this issue.

Regards,
Sam
Sam_CFD is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
restarting paused transient simulation using reactingFoam JMDag2004 OpenFOAM Running, Solving & CFD 0 May 6, 2015 13:15
Use homogeneous results as the initial guess for an inhomogeneous simulation RicochetJ CFX 5 December 26, 2014 14:44
Strange error in multithread simulation with interFoam davidmd OpenFOAM Running, Solving & CFD 3 December 13, 2014 21:45
setting up a simulation with multiple interactions phandy OpenFOAM Running, Solving & CFD 1 October 6, 2014 03:16
interFoam vs. simpleFoam channel flow comparison DanM OpenFOAM Running, Solving & CFD 11 January 5, 2013 07:21


All times are GMT -4. The time now is 11:59.