CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

Which solver is appropriate for microbubble flow simulation in a tank ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 23, 2015, 22:20
Default Which solver is appropriate for microbubble flow simulation in a tank ?
  #1
Member
 
Join Date: Nov 2009
Posts: 61
Rep Power: 7
waku2005 is on a distinguished road
Dear all

I'd like to simulate micro-bubble flow in a tank.
Which solver is more appropriate for such a flow simulation ?

Computational conditions are as follows:
  • Water including micro bubble with specified particle size distributions flows into a tank from inlet and discharges from outlet
  • Flow is in lamiar, or hopefully RAS turbulence models are applicable in a tank
  • Bubbles are dissipated (smaller size bubbles will get into a larger size bubble )
  • Lift/drag forces should be considered
  • OF 2.3.x/2.4.x/OF-ext 3.1 are available
Sincerely yours,
waku2005
waku2005 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind Tunnel Flow Simulation Mass Flow BC Issue ledelman SU2 4 August 3, 2014 18:38
mass flow rate issue in supersonic nozzle simulation xkang FLUENT 0 July 31, 2014 16:06
How is the accuracy using VOF (pressure based solver) on supersonic flow air_fun Fluent Multiphase 0 June 18, 2014 13:06
compressible flow calculation error using rhoSimpleFoam solver student4326 OpenFOAM 6 February 10, 2012 10:36
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 21:31


All times are GMT -4. The time now is 05:28.