CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

DelT decrease fast by using interFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 7, 2015, 03:51
Default DelT decrease fast by using interFoam
  #1
Senior Member
 
Nguyen Duy Trong
Join Date: Apr 2014
Posts: 124
Rep Power: 11
ndtrong is on a distinguished road
Hello everyone,

I hope someone here can provide some guidances for a simulation that I am trying to run. I am trying to simulate free surface around a Wigley hull form by using interFoam. In the tutorial, there is a sample case for this hull form with the computational domain using the box grid. Now, I change the grid topology to O-O type as shown in the attached Figure (My grid is fine by using checkMesh tool of openfoam - file Mesh.txt).

The boundary conditions and setting file of fvSchemes and fvSolutions are keep the same with the tutorials cases. Setting up for the boundary condition and system are as in the attached file.

I tried to run to simulate my case. However, delT in my simulation decrease much and fast. From deltaT = 0.000117647 at the first step to deltaT=1.61412e-13 at Time = 0.001054993463.
Therefore, I could not finish my computation.

I would be very appreciative if someone could show me in the right direction to get this model.

Regards,
Trong
Attached Images
File Type: jpg wigley hull.jpg (32.1 KB, 9 views)
Attached Files
File Type: txt Mesh.txt (2.9 KB, 0 views)
File Type: zip 0.zip (3.5 KB, 0 views)
File Type: zip system.zip (3.6 KB, 1 views)
ndtrong is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
interFoam vs. simpleFoam channel flow comparison DanM OpenFOAM Running, Solving & CFD 12 January 31, 2020 16:26
alpha1 decrease while using interFoam afo3 OpenFOAM Running, Solving & CFD 1 December 17, 2015 14:22
interFoam in parallel gooya_kabir OpenFOAM Running, Solving & CFD 0 December 9, 2013 06:09
Problem of InterFoam with LES SpalartAllmarasIDDES keepfit OpenFOAM 3 August 29, 2013 12:21
Open Channel Flow using InterFoam type solver sxhdhi OpenFOAM Running, Solving & CFD 3 May 5, 2009 22:58


All times are GMT -4. The time now is 04:28.