|January 2, 2016, 20:47||
pisoFoamTurbine solver contained in the SOWFA: SST Turbulence Model problems
Join Date: Nov 2015
Posts: 1Rep Power: 0
I have been using the pisoFoamTurbine solver contained in the SOWFA software (https://github.com/NREL/SOWFA). I'm using the SST turbulence model. To do so, I have included U, p, k and omega sub-directories as initial conditions for the case. However when when I run pisoFoamTurbine, it shows the following error:
Reading field, p...
Reading field, U...
Creating vorticity field, omega...
--> FOAM FATAL IO ERROR:
unexpected class name volScalarrField expected volVectorField
while reading object omega
file: /home/camilosedano/OpenFOAM/camilosedano-2.3.1/Turb/1_Turbina/0.25M/0/omega at line 15.
From function regIOobject::readStream(const word&)
in file db/regIOobject/regIOobjectRead.C at line 136.
To solve it, I change the class of the "omega" file from volScalarField to volVectorField, and change the values from scalar to vector notation. When I run the solver again it shows the same error, but this time it states that it should read a volScalarField (as it used to be) instead of a volVectorField.
I have been looking at the solver code to see if I can find anything that leads to this error but I haven't found anything. I'm new to OpenFOAM so thanks for any help you can give me.
|openfoam, turbulence modeling|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Hoz to fix Y+ dependence on inlet Mach number? SST turbulence model||LuReym||CFX||5||January 20, 2015 17:28|
|SST turbulence model question in ANSYS CFX||drsidd10||CFX||2||January 18, 2015 06:38|
|How to decide to Turbulence model||shipman||OpenFOAM||2||August 18, 2013 03:00|
|Porous artery and SST turbulence model||kmgraju||CFX||13||June 11, 2013 00:50|
|Wrong calculation of nut in the kOmegaSST turbulence model||FelixL||OpenFOAM Bugs||27||March 27, 2012 09:02|