|
[Sponsors] |
January 16, 2013, 07:57 |
Error in interDymFoam sixDoF after remeshing
|
#1 | |
New Member
Waldemar Hübert
Join Date: Sep 2011
Posts: 6
Rep Power: 14 |
I try to simulate an small Object with a certain speed crashing into water. For this problem I mesh a .stl object into a small 1x1x2mm domain filled with 3/4 water and 1/4 air where the object starts its journey. The simulation is aborted when the mesh exceeds a certain amount of max skewness. This is how the first run looks like when its aborted due to skewness :
After a short remeshing and mapping of the Domain the mesh looks like this: After remeshing the information of the solidBody is copied and the simulation restarted. Here is where following error occurs. Quote:
|
||
January 17, 2013, 15:46 |
|
#2 |
Senior Member
Daniele Vicario
Join Date: Mar 2009
Location: Novara, Italy
Posts: 142
Rep Power: 17 |
Hi Waldemar,
Can you upload your case ?
__________________
Daniele Vicario blueCFD2.1 - Windows 7 |
|
January 18, 2013, 15:23 |
|
#3 |
New Member
Waldemar Hübert
Join Date: Sep 2011
Posts: 6
Rep Power: 14 |
http://depositfiles.com/files/u5kz10e56
Here it is. its already meshed, but I deleted the files of the run in Casefirst. When you run the second case with interDyMFoam you get said error. I typically stop the run at skewness 0.7 , start a remesh with the topology and run the rest in a second, respective third etc case. I hope someone can help me. Stuck with this problem for too long now |
|
January 21, 2013, 19:45 |
|
#4 |
New Member
Max Haase
Join Date: Oct 2011
Location: Launceston
Posts: 8
Rep Power: 14 |
Hi Waldemar,
I got similar error messages. In my simulation, I did moveMesh and then run interDyMFoam on the moved/deformed mesh. It has been a bit trial and error, but what I figured out is that setting initialOrientation in the pointdisplacementDict is somehow screwing up things. In an earlier post, (http://www.cfd-online.com/Forums/ope...mapfields.html) I said that this is the way to go, but somehow that was not the final answer to this problem. Try your case without initialOrientation (and maybe w/o initialCentreOfMass). Honestly, I dont know why you need to state the initial* and whats the purpose of it. If anyone can bring some light into this issue, please let us know! Let me know how you go. Cheers, Max |
|
January 21, 2013, 20:04 |
|
#5 |
New Member
Waldemar Hübert
Join Date: Sep 2011
Posts: 6
Rep Power: 14 |
Hallo Max,
I honestly did not think about this entry, I just copied the whole one. But it works like a charm now when I delete those 2 initialentries. Greetings, a very thankful Waldemar |
|
January 5, 2016, 15:59 |
|
#6 | |
New Member
Malo Pocheau
Join Date: Dec 2015
Posts: 1
Rep Power: 0 |
Quote:
I'm sorry to bother you about a case you ran almost three years ago, but I find myself in a rather similar situation to yours (an interDyMFoam sixDoF simulation which needs remeshing every once in a while to keep the skewness to reasonable levels). I Have tried a whole variety of remeshing options (dynamicTopoFvMesh, dynamicRefineFvMesh, etc...) But none seemed to work for me. Hence I have a few questions about your solution to this problem. I was wondering how you managed to stop your simulation, remesh it and continue running it in a separate case. Did you stop the simulation manually? Or did you modify the solver to do it for you? Also how did you perform your remeshing and mapping of the topology once you had stopped your simulation? What tools did you use? I was also wondering what modifications you had to do to the case to run it again once the remeshing had been done. Finally, i was wondering if maybe you could re-upload your case (as the link seems to be broken) as I hope it might hold some of the answers to my questions. I'm sorry to harass you with questions like this on an old case, and hope you still remember it enough to help me. Thank you for your consideration. Malo |
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Remeshing with User Defined Options | ChristianF | CFX | 2 | September 24, 2014 09:19 |
ICEM CFD Replay Remeshing | EvaS | CFX | 1 | December 19, 2012 19:30 |
Bugg in Remeshing in 3D - Any Fluent Wizards ?? | Amr | FLUENT | 1 | November 1, 2011 04:04 |
error using interDyMFoam with kOmegaSST to simulate sloshing | anmartin | OpenFOAM Running, Solving & CFD | 0 | July 20, 2010 13:21 |
Dynamic Grid Remeshing causing Divergence? | Andrew Wick | FLUENT | 0 | January 23, 2006 18:39 |