CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Coupling OpenFOAM with Abaqus through MpCCI

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 20, 2009, 04:47
Default Hi Foamers, I am trying to
  #1
New Member
 
Mathias Kvick
Join Date: Mar 2009
Location: Stockholm / Istanbul, Sweden / Turkey
Posts: 11
Rep Power: 17
kvick is on a distinguished road
Hi Foamers,

I am trying to couple OpenFOAM with Abaqus through MpCCI and I want to know if anyone else did it before.

To do this it would be much easier if I only had to deal with one case file, is there any easy way to make all the dictionaries into a single file?

//Mathias
kvick is offline   Reply With Quote

Old   February 20, 2009, 06:48
Default Hello, you will have modify
  #2
Member
 
Etienne Lorriaux
Join Date: Mar 2009
Location: Compiegne, France
Posts: 45
Rep Power: 17
elorriaux is on a distinguished road
Hello,

you will have modify the OF solver you want to use to make it read in the file you want to use.

Are you planning to perform static or transient analysis ? We are working with partners who are trying to perform transient FSI analysis with Fluent and Abaqus through MpCCI, it seems that MpCCI is not able to deal with transient analysis with Abaqus.

Etienne.
elorriaux is offline   Reply With Quote

Old   February 23, 2009, 15:35
Default Hello, Thank you for your
  #3
New Member
 
Mathias Kvick
Join Date: Mar 2009
Location: Stockholm / Istanbul, Sweden / Turkey
Posts: 11
Rep Power: 17
kvick is on a distinguished road
Hello,

Thank you for your answer.

We are currently performing static analysis with Fluent and Abaqus through MpCCI, and we are also working with setting up a transient problem but no simulations has been done so far. Do you know why MpCCI is not able to deal with transient analysis with Abaqus?

Did you modify OpenFOAM to work with MpCCI? How do you suggest to modify the solver? Is there any easy way to do this?

Thank you for your interest.

//Mathias
kvick is offline   Reply With Quote

Old   February 23, 2009, 16:00
Default Hi Mathias, sorry, i do not
  #4
Member
 
Etienne Lorriaux
Join Date: Mar 2009
Location: Compiegne, France
Posts: 45
Rep Power: 17
elorriaux is on a distinguished road
Hi Mathias,

sorry, i do not work with Abaqus neither MpCCI, I'm working with Adina for FSI analysis and trying to develop a coupling between Code Aster and OpenFOAM.

I'll send the link to the right guy if he wants to exchange with you about the MpCCI/Abaqus subject. (I'm not sure the OF discussion group is the right place to deal with that).

For the OF solvers modification, you will have to understand how the dictionaries "lookup" works.

Regards,

Etienne.
elorriaux is offline   Reply With Quote

Old   February 24, 2009, 08:56
Default Hi Etienne, Thanks for you
  #5
New Member
 
Mathias Kvick
Join Date: Mar 2009
Location: Stockholm / Istanbul, Sweden / Turkey
Posts: 11
Rep Power: 17
kvick is on a distinguished road
Hi Etienne,

Thanks for you help, I'll look into the lookup function works. I talked to the guy who is doing the transient simulation with MpCCI/Abaqus at the moment, and he does not have any problems.

//Mathias
kvick is offline   Reply With Quote

Old   February 24, 2009, 08:58
Default Hi Etienne, Thanks for you
  #6
New Member
 
Mathias Kvick
Join Date: Mar 2009
Location: Stockholm / Istanbul, Sweden / Turkey
Posts: 11
Rep Power: 17
kvick is on a distinguished road
Hi Etienne,

Thanks for you help, I'll look into how the lookup function works. I talked to the guy who is doing the transient simulation with MpCCI/Abaqus at the moment, and he does not have any problems.

//Mathias
kvick is offline   Reply With Quote

Old   July 27, 2010, 04:00
Default mapping results from openfoam to abaqus
  #7
New Member
 
srikara's Avatar
 
Srikara Mahishi
Join Date: Mar 2009
Location: Bangalore
Posts: 22
Rep Power: 17
srikara is on a distinguished road
Hi Foamers,
I have a problem where in I have to use the results obtained from a flow simulation in openfoam as an initial boundary condition in abaqus for thermal stress analysis. The geometries will remain the same in both the analysis. I wanted to know if there is any way of doing this for openfoam and abaqus.
Does anyone know how to do this?

Thank you in advance,
Srikara
srikara is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
MPCCI Code coupling library Bukhari Main CFD Forum 0 April 25, 2007 04:43
Problem about FLUENT-MPCCI-ABAQUS FSI simulation! whpsoft FLUENT 0 May 24, 2006 11:22
Coupling Fluent with a FEM Code via MpCCI Carsten Dehning FLUENT 0 October 27, 2002 11:41
Mpcci Code coupling Jonas Siemens 1 May 20, 2002 10:40


All times are GMT -4. The time now is 00:33.