CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   MRF with translation zone in 2D turbomachinery case (http://www.cfd-online.com/Forums/openfoam-solving/57914-mrf-translation-zone-2d-turbomachinery-case.html)

sponiar February 23, 2009 11:14

Hi All, I am just trying to c
 
Hi All,
I am just trying to catch: how to simulate frozen rotor with translation zone in 2D case (see schematic picture below).

When I am solving 2D case, where rotation axes is normal to the xy-plane, there are not problem with seting up with MRFZones dictionary.

My questions are:
1) How to set up case (see picture) with translation zone?
2) What boundary conditions should I use at the boundaries (cyclic, cyclicGGI ...)

Regards,
David
_____

http://www.cfd-online.com/OpenFOAM_D...es/1/11349.png

krapic April 16, 2012 17:35

This topic is more than 3 years old... Does anyone know how to solve this?

I installed OF-1.6ext and tried with cyclicGgi but I don't know where to start. Is there a simpler solution?

Please help!


All times are GMT -4. The time now is 05:38.