CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

Poblem with splitMesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 3, 2008, 04:07
Default Hi I've used the splitMesh ut
  #1
New Member
 
Sara Schairer
Join Date: Mar 2009
Posts: 26
Rep Power: 8
sara is on a distinguished road
Hi
I've used the splitMesh utility on my geometry. After I refined the mesh I transferred it back to OpenFoam and wanted to apply splitMesh again. Since I've done it before the procedure has to be correct, only the mesh has changed. This is the error message I get:

Create time

Create polyMesh for time = 0

Read 94543 faces to split



Can not find faces using edge (84572 721599) on cell 81820#0 Foam::error::printStack(Foam:stream&) in "/home/schairer/OpenFOAM/OpenFOAM-1.5/lib/linuxGccDPOpt/libOpenFOAM.so"
#1 Foam::error::abort() in "/home/schairer/OpenFOAM/OpenFOAM-1.5/lib/linuxGccDPOpt/libOpenFOAM.so"
#2 Foam::meshTools::getEdgeFaces(Foam::primitiveMesh const&, int, int, int&, int&) in "/home/schairer/OpenFOAM/OpenFOAM-1.5/lib/linuxGccDPOpt/libmeshTools.so"
#3 __gxx_personality_v0 in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh"
#4 Foam::regionSide::walkAllPointConnectedFaces(Foam: :primitiveMesh const&, Foam::HashSet<int,> > const&, Foam::HashSet<int,> > const&) in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh"
#5 Foam::regionSide::regionSide(Foam::primitiveMesh const&, Foam::HashSet<int,> > const&, Foam::HashSet<int,> > const&, int, int) in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh"
#6 main in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh"
#7 __libc_start_main in "/lib/tls/i686/cmov/libc.so.6"
#8 Foam::regIOobject::write() const in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh"


From function meshTools::getEdgeFaces(const primitiveMesh&, const label, const label, label&, label&
in file meshTools/meshTools.C at line 514.

FOAM aborting

Does this mean something to anyone? Because I really don't know what to do with this.
Hope someone has some suggestions what I could do to get it working.
Cheers, Sara
sara is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SplitMesh error messages ariorus OpenFOAM Mesh Utilities 3 October 20, 2009 09:12
Exporting the CFX-Mesh to Fluent poblem?? zaidun CFX 0 April 13, 2006 22:49
SplitMesh problem sbrahim OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 0 April 12, 2005 11:33
Poblem with Unsteady for Natural Convection TK FLUENT 0 March 1, 2005 09:29


All times are GMT -4. The time now is 13:01.