CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Implemening Slip bc and Dynamic contact angle in interFoam (http://www.cfd-online.com/Forums/openfoam-solving/58355-implemening-slip-bc-dynamic-contact-angle-interfoam.html)

asaha November 11, 2008 09:51

Hello, I would like to know
 
Hello,

I would like to know if, it is possible of speficying the following in interFoam solver:
(1) a slip b.c on the walls (b*d(u)/d(y) = u_0, y = 0; b=slip length, u_o=slip velocity at the wall)
(2) Dynamic contact angle (|tan(theta)| = a*Ca^(1/3) - b*(lambda)^0.04*Ca^0.293; a = 7.48, b = 3.28, lambda = 10E-8, Ca = Capillary number)

I would request the interFoam users to share there thoughts on how to implement these in the exisiting interFoam solver (OF1.5).

Thanks,

a a saha.

jaswi November 11, 2008 10:04

Hi A A Saha regarding the (
 
Hi A A Saha

regarding the (2):

Take a look into the
/home/openfoam/OpenFOAM/OpenFOAM-1.5/src/transportModels/interfaceProperties/gam maContactAngle/

There lives the hierarchy for the existing models of contactAngle . Take a look in particular, the dynamic contact angle calcs.

Go through the code and see whether the framework will suit your requirements.

Kind Regards
Jaswi

farhagim July 29, 2010 15:49

Hi saha,

Did you implement your dynamic contact angle in interFoam. I would be so grateful if you share your experience with me.

Thanks,
MEhran

Quote:

Originally Posted by asaha (Post 198864)
Hello,

I would like to know if, it is possible of speficying the following in interFoam solver:
(1) a slip b.c on the walls (b*d(u)/d(y) = u_0, y = 0; b=slip length, u_o=slip velocity at the wall)
(2) Dynamic contact angle (|tan(theta)| = a*Ca^(1/3) - b*(lambda)^0.04*Ca^0.293; a = 7.48, b = 3.28, lambda = 10E-8, Ca = Capillary number)

I would request the interFoam users to share there thoughts on how to implement these in the exisiting interFoam solver (OF1.5).

Thanks,

a a saha.



All times are GMT -4. The time now is 03:08.