FixedFluxPressure cannot find field 1%7cAU

anger · September 22, 2008, 08:08

Hello,

I'm stumbling across the same error.
I think that it has to do with a missing volScalarField, but I have no idea how to register this field in the objectRegistry.
Anybody knows what to do to get the fixedFluxPressure boundary condition running with (simple)Foam?

Best regards,
-Thomas

deepsterblue · September 22, 2008, 10:53

Declare a field called 'rUA' in createFields.H, like this:

volScalarField rUA
(
IOobject
(
"(1|A(U))",
runTime.timeName(),
mesh
),
mesh,
dimensionedScalar("rUA", dimTime, 1),
zeroGradientFvPatchScalarField::typeName
);

And call:

rUA = 1.0/UEqn.A();

inside the PISO loop.

anger · September 23, 2008, 04:15

Hello Sandeep,

thank you for your help, this works.
Just foor the books: a little typo occured in the last equation which should read

rUA = 1.0/UEqn().A()

I put this in pEqn.H

Best regards,
-Thomas

November 10, 2008, 05:50

hi to all

I want to simulate in straight pipe to include some
heat flow and to see temperature increasing...
which solver I should use...

can anyone help me

EMO

September 22, 2008, 08:08	Hello, I'm stumbling across	#1
anger Member Thomas Wolfanger Join Date: Mar 2009 Location: South West Germany Posts: 62 Rep Power: 17	Hello, I'm stumbling across the same error. I think that it has to do with a missing volScalarField, but I have no idea how to register this field in the objectRegistry. Anybody knows what to do to get the fixedFluxPressure boundary condition running with (simple)Foam? Best regards, -Thomas

September 22, 2008, 10:53	Declare a field called 'rUA' i	#2
deepsterblue Senior Member Sandeep Menon Join Date: Mar 2009 Location: Amherst, MA Posts: 403 Rep Power: 25	Declare a field called 'rUA' in createFields.H, like this: volScalarField rUA ( IOobject ( "(1\|A(U))", runTime.timeName(), mesh ), mesh, dimensionedScalar("rUA", dimTime, 1), zeroGradientFvPatchScalarField::typeName ); And call: rUA = 1.0/UEqn.A(); inside the PISO loop. __________________ Sandeep Menon University of Massachusetts Amherst https://github.com/smenon

September 23, 2008, 04:15	Hello Sandeep, thank you fo	#3
anger Member Thomas Wolfanger Join Date: Mar 2009 Location: South West Germany Posts: 62 Rep Power: 17	Hello Sandeep, thank you for your help, this works. Just foor the books: a little typo occured in the last equation which should read rUA = 1.0/UEqn().A() I put this in pEqn.H Best regards, -Thomas

November 10, 2008, 05:50	hi to all I want to simulat	#4
emilianyassenov Guest Posts: n/a	hi to all I want to simulate in straight pipe to include some heat flow and to see temperature increasing... which solver I should use... can anyone help me EMO

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FFT on flow field to find peaks?	CFDtoy	Main CFD Forum	17	June 7, 2011 06:34
Putting submesh field values into field on parent mesh	helmut	OpenFOAM Running, Solving & CFD	2	June 20, 2006 07:31
How can I find maximum of a field	Q	FLUENT	2	November 9, 2005 04:00
where to find velocity field for square pipes???	enrico	Main CFD Forum	2	February 4, 2005 11:32
I wish to find the proper model to validate the temperature field.	G.H.Lee	Main CFD Forum	1	May 6, 1999 02:05