Bug in turbulent dynamic Mesh Solver -- CFD Online Discussion Forums

October 29, 2008, 03:48	Dear all, in my current exa	#1
thomas New Member Thomas Gallinger Join Date: Mar 2009 Posts: 28 Rep Power: 17	Dear all, in my current example I encountered a quite strange behavior of the moving mesh solvers. I have a problem with complex geometry and a quite low quality tetrahedral mesh. When I run it with the turbFoam Solver (Version 1.4.1-dev and 1.5), everything is OK and the results are as expected. When I use the turbDyMFoam solver on the absolutely identical case and specify the mesh motion to be zero everywhere, I expected to have no differences to the run with turbFoam, but the solution shows diveregence after arround 30 time steps (Courant number explodes). How can this be? With no mesh motion, turbFoam and turbDyMFoam should produce the same results. I checked both with version 1.4.1-dev and 1.5. Does anyone have any hints on this behavior? Best regards, Thomas

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbulent compressible solver rhoTurbFoam with dynamic moving mesh	eno	OpenFOAM Running, Solving & CFD	4	December 12, 2011 03:38
Turbulent solver or LES	philippose	OpenFOAM Running, Solving & CFD	8	November 13, 2008 06:01
Questions to Dynamic Mesh solver and diffusivity	florian_krause	OpenFOAM Running, Solving & CFD	12	January 11, 2008 21:33
Problems using dynamic mesh and 6dof solver	Brett	FLUENT	0	March 3, 2006 17:45
coupled solver and dynamic mesh	steph	FLUENT	0	June 11, 2004 08:28

All times are GMT -4. The time now is 04:09.