diesel Engine simulation in OpenFOAM

karam · June 28, 2009, 06:56

Hi, Foamers!!

I have some trouble in Diesel engine simulation in OpenFOAM.

I made "my sector mesh" by converting from KIVA3V to OpenFOAM and got "control", "system" folder files from dieselFOAM tutorial case. (control/enginegeometry file comes from engineFOAM tutorial case)

I used dieselEngineFOAM solver that provided by OpenFOAM 1.5.x

Finally, I can see moving mesh and diesel spray injection in my mesh!!

But........."Pressure" does not changing!!

Pressure always keep staying for both motoring & injecting conditon
(i.e initial condition for p = 100000 at -180
after -60 degree "p" also 100000)

How can I solve this problem......

belows are my input file list
/-180/epsilon, k, N2, O2, p, spray, T, U and Ydefault

/chemkin/chem.inp

/constant/chemistryProperties, combustionProperties, engineGeometry
enviromentalProperties, injectorProperties, RASproperties, sprayProperties
thermophysicalProperties

/system/controlDict, fvSchemes and fvSolution

abminternet · March 1, 2011, 09:46

Hi Karam,

Did you manage to solve the pressure problem? I am using sonicTurbDyMEngineFoam and I observe the same thing!! pressure is not changing :S I am running out of ideas, maybe you could tell me what the problem and solution was in your case??

June 28, 2009, 06:56	diesel Engine simulation in OpenFOAM	#1
karam New Member trackeras Join Date: Apr 2009 Posts: 4 Rep Power: 16	Hi, Foamers!! I have some trouble in Diesel engine simulation in OpenFOAM. I made "my sector mesh" by converting from KIVA3V to OpenFOAM and got "control", "system" folder files from dieselFOAM tutorial case. (control/enginegeometry file comes from engineFOAM tutorial case) I used dieselEngineFOAM solver that provided by OpenFOAM 1.5.x Finally, I can see moving mesh and diesel spray injection in my mesh!! But........."Pressure" does not changing!! Pressure always keep staying for both motoring & injecting conditon (i.e initial condition for p = 100000 at -180 after -60 degree "p" also 100000) How can I solve this problem...... belows are my input file list /-180/epsilon, k, N2, O2, p, spray, T, U and Ydefault /chemkin/chem.inp /constant/chemistryProperties, combustionProperties, engineGeometry enviromentalProperties, injectorProperties, RASproperties, sprayProperties thermophysicalProperties /system/controlDict, fvSchemes and fvSolution

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
IC engine simulation tutorial by FLUENT	yash	Main CFD Forum	1	April 21, 2009 05:05
IC Engine simulation in Fluent	Ravi Kiran	FLUENT	0	March 5, 2006 23:48
Documentation OpenFOAM engine simulation	kukikano	OpenFOAM Running, Solving & CFD	1	November 17, 2005 04:30
Engine simulation (seeking help with method to use)	Geoff Rathbun	Main CFD Forum	4	April 13, 1999 14:19
Question concerning about the flow simulation of a fan in an engine room.	ghlee	Main CFD Forum	3	October 21, 1998 07:05

March 1, 2011, 09:46		#2
abminternet Member Join Date: Nov 2010 Posts: 86 Rep Power: 15	Hi Karam, Did you manage to solve the pressure problem? I am using sonicTurbDyMEngineFoam and I observe the same thing!! pressure is not changing :S I am running out of ideas, maybe you could tell me what the problem and solution was in your case??