Air bubble in water

liu · April 15, 2008, 17:47

I want to simulate an air bubble in water. The air bubble is compressible and the water is not. Is there any solver I can start with? Basically there are two different fluids (compressible and incompressible). For VOF method, both fluids are incompressible.

gwierink · April 16, 2008, 02:27

Hi Xiaofeng,

I think there are some tutorials that deal with that or something similar, check page U-84 of the OpenFOAM manual on Multiphase flow. I intend to try this as well, although I haven't gotten to it yet. Do you have any specific problems or is it just starting?

Regards, Gijs

liu · April 16, 2008, 12:18

We have a 1D model which deals with filling of pipe flows. Air bubbles are always seen in this type of flow. They are sometimes trapped inside the pipe (for example sewage pipes). This caused a lot of problem especially during a flood event. The purpose is to use 3D model to validate our 1D simple model.

I will have a look at the user mannual.

liu · April 16, 2008, 12:24

It seems there is no such solver with solve both incompressible and compressible flows.

Anyone has experience on this?

April 15, 2008, 17:47	I want to simulate an air bubb	#1
liu Senior Member Xiaofeng Liu Join Date: Mar 2009 Location: San Antonio, TX, USA Posts: 117 Rep Power: 6	I want to simulate an air bubble in water. The air bubble is compressible and the water is not. Is there any solver I can start with? Basically there are two different fluids (compressible and incompressible). For VOF method, both fluids are incompressible. __________________ Xiaofeng Liu, Assistant Professor Department of Civil and Environmental Engineering University of Texas at San Antonio email: xiaofeng.liu@utsa.edu Web: http://engineering.utsa.edu/~xiaofengliu

April 16, 2008, 02:27	Hi Xiaofeng, I think there	#2
gwierink Senior Member Gijsbert Wierink Join Date: Mar 2009 Posts: 382 Rep Power: 7	Hi Xiaofeng, I think there are some tutorials that deal with that or something similar, check page U-84 of the OpenFOAM manual on Multiphase flow. I intend to try this as well, although I haven't gotten to it yet. Do you have any specific problems or is it just starting? Regards, Gijs __________________ Regards, Gijs

April 16, 2008, 12:18	We have a 1D model which deals	#3
liu Senior Member Xiaofeng Liu Join Date: Mar 2009 Location: San Antonio, TX, USA Posts: 117 Rep Power: 6	We have a 1D model which deals with filling of pipe flows. Air bubbles are always seen in this type of flow. They are sometimes trapped inside the pipe (for example sewage pipes). This caused a lot of problem especially during a flood event. The purpose is to use 3D model to validate our 1D simple model. I will have a look at the user mannual. __________________ Xiaofeng Liu, Assistant Professor Department of Civil and Environmental Engineering University of Texas at San Antonio email: xiaofeng.liu@utsa.edu Web: http://engineering.utsa.edu/~xiaofengliu

April 16, 2008, 12:24	It seems there is no such solv	#4
liu Senior Member Xiaofeng Liu Join Date: Mar 2009 Location: San Antonio, TX, USA Posts: 117 Rep Power: 6	It seems there is no such solver with solve both incompressible and compressible flows. Anyone has experience on this? __________________ Xiaofeng Liu, Assistant Professor Department of Civil and Environmental Engineering University of Texas at San Antonio email: xiaofeng.liu@utsa.edu Web: http://engineering.utsa.edu/~xiaofengliu

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inject the water bubble	summer	FLUENT	3	May 4, 2006 18:42
Modelling of bubble merging submerge on water	Carlos	Main CFD Forum	0	October 26, 2005 09:30
Hot gas bubble collapse in cool water	William Palm	FLUENT	1	April 20, 2005 10:53
injecting water mixed with tiny bubble	willy	FLUENT	3	June 18, 2001 08:50
Bubble motion in water...help	Jazaul Ikhsan	Main CFD Forum	8	May 31, 2001 01:35