|January 23, 2008, 08:45||
Hello, I have compiled buoy
Join Date: Mar 2009
Posts: 38Rep Power: 8
I have compiled buoyantFoam solver after adding transport equation and included the hCombustionThermo class instead of basicThermo. The compilation has been successful. But for a simple 2D case with one specie the case gives the following error.
FOAM FATAL ERROR : attempt to use janafThermo<equationofstate> out of temperature range 200 -> 5000; T = -37.5747#0 Foam::error::printStack(Foam:stream&) in "/home/caelinux/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#1 Foam::error::abort() in "/home/caelinux/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#2 Foam::specieThermo<foam::janafthermo<foam::perfect gas> >::H(double) const in "/home/caelinux/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libcombustionThermophy sicalModels.so"
#3 Foam::hMixtureThermo<foam::reactingmixture>::calcu late() in "/home/caelinux/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libcombustionThermophy sicalModels.so"
#4 Foam::hMixtureThermo<foam::reactingmixture>::corre ct() in "/home/caelinux/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libcombustionThermophy sicalModels.so"
#5 main in "/home/caelinux/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/mechFlow"
Actually, the error doesn't make sense to me as the temprature inside the while domain is atleast above 300K and it cannot go below 0 K.
There is some problem with the numerics which I am not able to find... I have seen people facing the same problem. I tried to increase the number of orthogonal correctors with no change in the results.
I just want to know as what is causing such problems?
The mesh is pretty generic... With hex cells.
|Thread||Thread Starter||Forum||Replies||Last Post|
|BuoyantFoam and hotRoom in 15||egp||OpenFOAM Bugs||9||February 24, 2009 07:52|
|ThermoPhysicalProperties in buoyantFoam||prashant24983||OpenFOAM Running, Solving & CFD||0||October 6, 2007 09:40|
|BuoyantFoam||braennstroem||OpenFOAM Running, Solving & CFD||22||September 19, 2007 16:55|
|BuoyantFoam in parallel||sylvester||OpenFOAM Running, Solving & CFD||0||July 19, 2007 05:38|
|Error in buoyantFoam||guilherme||OpenFOAM Running, Solving & CFD||0||December 20, 2006 11:07|