CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

Negative k for simpleFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 24, 2007, 21:03
Default hi All, For higher order si
  #1
New Member
 
Rajneesh
Join Date: Mar 2009
Posts: 28
Rep Power: 8
vega is on a distinguished road
hi All,

For higher order simpleFoam simulations, here is last iteration log message:
Time = 2073

DILUPBiCG: Solving for Ux, Initial residual = 0.000338398, Final residual = 8.38532e-09, No Iterations 3
DILUPBiCG: Solving for Uy, Initial residual = 0.000291476, Final residual = 8.40278e-09, No Iterations 3
DILUPBiCG: Solving for Uz, Initial residual = 0.00137203, Final residual = 3.11507e-08, No Iterations 3
GAMG: Solving for p, Initial residual = 0.0204829, Final residual = 5.70976e-09, No Iterations 15
GAMG: Solving for p, Initial residual = 0.0037571, Final residual = 4.99011e-09, No Iterations 13
time step continuity errors : sum local = 3.52608e-08, global = 1.90265e-09, cumulative = -5.96504e-08
DILUPBiCG: Solving for epsilon, Initial residual = 7.05039e-05, Final residual = 6.64917e-08, No Iterations 2
bounding epsilon, min: -6092.91 max: 1.44592e+06 average: 28134.5
DILUPBiCG: Solving for k, Initial residual = 0.000233005, Final residual = 1.70773e-07, No Iterations 2
bounding k, min: -3.69022 max: 525.424 average: 33.4815

ExecutionTime = 3715.84 s ClockTime = 3734 s

End
...............
Log shows that k and epsilon are bounded to minimum values of < 0. However, plotting solution at the same instant in paraView shows a +ve lower bound of k. WHy is this disconnect?

vega is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PitzDaily example and simpleFoam csomerlot OpenFOAM Running, Solving & CFD 2 November 6, 2013 12:20
What is phi in simpleFoam ehsan_vaghefi OpenFOAM Running, Solving & CFD 7 September 29, 2013 11:00
SimpleFoam How to specify density sebastiank OpenFOAM Running, Solving & CFD 2 October 31, 2008 10:39
Using simpleFoam with water nico765 OpenFOAM Running, Solving & CFD 7 October 23, 2007 05:39
SimpleFoam woes msrinath80 OpenFOAM Bugs 2 April 13, 2007 10:15


All times are GMT -4. The time now is 00:15.