CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

Error found in stress tutorial

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 23, 2007, 03:34
Default I found a bug in the 1.4.1 rel
  #1
Senior Member
 
Michael Jaworski
Join Date: Mar 2009
Location: Champaign, IL, USA
Posts: 126
Rep Power: 7
mike_jaworski is on a distinguished road
I found a bug in the 1.4.1 release.

While attempting to complete the solidDisplacementFoam tutorial, the following error comes up when you try to run it:
************************
--> FOAM FATAL IO ERROR : expected 'true' or 'false', found yes

file: /home/mjaworsk/OpenFOAM/mjaworsk-1.4.1/run/tutorials/solidDisplacementFoam/plate Hole/system/fvSolution::D::scaleCorrection at line 41.

From function operator>>(Istream&, bool&)
in file primitives/bool/boolIO.C at line 72.

FOAM exiting
************************

In order to fix it, you have to go into the fvSolution file and edit the information for "scale correction" and "directSolveCoarsest" from yes/no to true/false. Unfortunately, FoamX doesn't allow you to do it, so you have to get into it with your favorite editor. I'm guessing something was cleaned up in the GAMG code going to 1.4.x and certain files just haven't been updated.

I hope this helps someone somewhere down the line. I didn't go through all the steps in the cavity tutorial, but I wonder if any of these other items got borked with the transition to 1.4.1
mike_jaworski is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
injection not found in domain error San FLUENT 3 March 18, 2009 00:24
Error: Finite angle gap could not be found Richard CFX 0 December 8, 2005 09:39
Some problem about tutorial stress analysis of plate with hole ztdep OpenFOAM Running, Solving & CFD 0 August 12, 2005 08:05
Boundaries not found error Simone CD-adapco 2 June 13, 2005 08:36
No warning or error messages found. Atit Koonsrisuk CFX 5 January 14, 2003 12:06


All times are GMT -4. The time now is 21:16.