DICPCG solver in interFoam

m9819348 · September 20, 2007, 05:05

Dear,

I am trying to run a simple case of a liquid bubble moving in another liquid.

I use OpenFoam 1.4.1

The DICPCG solver needs about 20 to 300 iterations, right from the start and this does not diminish. I use a very small time step (1e-7).

For the solver settings, I used the standard settings of the DamBreak case.

My model is simply a pipe system (3D) through which the main fluid flows, including a small pipe inside the larger pipe where the bubbles are injected.

Is it normal that the solver needs so many iterations per time step?

msrinath80 · September 20, 2007, 13:10

First make sure that your courant number does not exceed 0.2. Next how bad/good is your mesh? Finally, if everything is going fine except for simulation time, then try using the GAMG solver as opposed to the DICPCG solver.

September 20, 2007, 05:05	Dear, I am trying to run a	#1
m9819348 New Member Ries Bouwman Join Date: Mar 2009 Location: Graz, Austria Posts: 28 Rep Power: 17	Dear, I am trying to run a simple case of a liquid bubble moving in another liquid. I use OpenFoam 1.4.1 The DICPCG solver needs about 20 to 300 iterations, right from the start and this does not diminish. I use a very small time step (1e-7). For the solver settings, I used the standard settings of the DamBreak case. My model is simply a pipe system (3D) through which the main fluid flows, including a small pipe inside the larger pipe where the bubbles are injected. Is it normal that the solver needs so many iterations per time step? __________________ Dr. Ries Bouwman Business Development ESI Group 004369917171525 @riesbouwman

September 20, 2007, 13:10	First make sure that your cour	#2
msrinath80 Senior Member Srinath Madhavan (a.k.a pUl\|) Join Date: Mar 2009 Location: Edmonton, AB, Canada Posts: 703 Rep Power: 21	First make sure that your courant number does not exceed 0.2. Next how bad/good is your mesh? Finally, if everything is going fine except for simulation time, then try using the GAMG solver as opposed to the DICPCG solver.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
InterFoam MULES solver	jaswi	OpenFOAM Running, Solving & CFD	6	June 21, 2022 08:46
About interFoam solver	zou_mo	OpenFOAM Running, Solving & CFD	129	December 2, 2019 05:39
Solver BICCG DILUPBiCG DICPCG	mamaly60	OpenFOAM Running, Solving & CFD	2	October 31, 2007 07:03
About interfoam solver	qiu	OpenFOAM Running, Solving & CFD	0	May 6, 2007 22:48
Need documentation for interFOAM solver	mer	OpenFOAM Running, Solving & CFD	5	May 31, 2006 12:22