CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Tet mesh vs Hex Mesh interFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 29, 2007, 09:03
Default Hi, This may be a silly que
  #1
Senior Member
 
Pei-Ying Hsieh
Join Date: Mar 2009
Posts: 317
Rep Power: 18
hsieh is on a distinguished road
Hi,

This may be a silly question, but, I cannot help it not to ask.

For a domain, say a rectangular box. Initially, filled with air. On the top surface, there is an inlet. Water flows into the domain from the inlet. On the top surface, it is atmosphere (except for the inlet face).

It has been said many times that hex elements are superior than tet elements. But, how much better? can someone give a somewhat quantitative comparison - specific to interFoam solver.

Thanks!

pei
hsieh is offline   Reply With Quote

Old   June 29, 2007, 13:45
Default There can be so much more bad
  #2
Member
 
Rolando Maier
Join Date: Mar 2009
Posts: 89
Rep Power: 17
rolando is on a distinguished road
There can be so much more bad in a mesh than the cell shapes. I made pretty good experience with tet meshes. The only thing you should really care about, is not to use tet cells near a wall. There you should use hex or prism cells.

Rolando
rolando is offline   Reply With Quote

Old   June 29, 2007, 14:17
Default Hex meshes are well known to r
  #3
Senior Member
 
Srinath Madhavan (a.k.a pUl|)
Join Date: Mar 2009
Location: Edmonton, AB, Canada
Posts: 703
Rep Power: 21
msrinath80 is on a distinguished road
Hex meshes are well known to resolve boundary layers more accurately. Only if the geometry cannot simply be meshed using hex elements, resort to tet elements.
msrinath80 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Create fine mesh that grows to coarse mesh (Urgent CZ FLUENT 1 January 3, 2009 11:36
Question on InterFoam moving mesh capabilities ziv OpenFOAM Running, Solving & CFD 0 April 23, 2008 10:11
InterFoam and moving mesh fugu OpenFOAM Running, Solving & CFD 0 March 10, 2008 17:54
InterFoam and moving mesh guitton OpenFOAM Running, Solving & CFD 0 February 17, 2008 12:38
Oscillatory mesh motion setup mesh flux ERROR jaswi OpenFOAM Running, Solving & CFD 5 August 23, 2007 05:41


All times are GMT -4. The time now is 00:47.