CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

BoundaryCondition_Mappring inlet for LES

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 13, 2007, 06:26
Default Hello, I have just download
  #1
Member
 
anne dejoan
Join Date: Mar 2009
Location: madrid, spain
Posts: 66
Rep Power: 17
anne is on a distinguished road
Hello,

I have just downloaded the last release of openFoam 1.4, and would like to use the
the new following boundary condition
"Mapping plane boundary condition, e.g. for fully-developed inlet conditions,
particularly for (but not limited to) LES."

I have looked at the new documentation document but did not find it.


I know you must be quite buzzy with the new relase,
but if you have some little time to let me know
where I can find an example to use the above boundary condition .. I will be quite happy.

Congratulations for the new added packages!

Thanks You

Anne
anne is offline   Reply With Quote

Old   April 13, 2007, 08:42
Default Here is the simpleFoam pitzDai
  #2
Senior Member
 
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26
mattijs is on a distinguished road
Here is the simpleFoam pitzDaily case with the directMapped inlet.

- after blockMesh overwrite the boundary file with boundary.orig (blockMesh resets the parameters)

- the directMapped patch definition gives the offset for the patch faces to find the cell (no interpolation!) to get the values from.

- the 0/ patch fields can now be of type directMapped and optionally maintain an average.

- it is not yet supported in decomposePar so
1) move 0 to 0-orig
2) change patch type in boundary file back to patch
3) decompose
4) change patch type in all processor*/boundary back to directMappedPatch
5) move 0-orig back to 0
6) decomposePar -fields

pitzDailyDirectMapped.tgz
mattijs is offline   Reply With Quote

Old   April 13, 2007, 10:26
Default Hi Mattis, I thank you a lo
  #3
Member
 
anne dejoan
Join Date: Mar 2009
Location: madrid, spain
Posts: 66
Rep Power: 17
anne is on a distinguished road
Hi Mattis,

I thank you a lot for your fast answer !
I am goint to try it.

Just one question: by "maintaining the average",
what does it mean ? I suppose it must more retlated to RANS than LES. (?)

Thanks you again,

Anne
anne is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
velocity inlet vs pressure inlet cheong FLUENT 6 April 9, 2011 04:07
subsonic inlet or supersonic inlet? mali CFX 0 November 28, 2008 21:57
reversed flow at velocity inlet / mass flow inlet ib FLUENT 1 March 26, 2007 14:11
How to set smoke inlet speed on inlet Adam FLUENT 0 October 4, 2005 09:18
inlet Sabatini Siemens 1 April 22, 2003 14:08


All times are GMT -4. The time now is 04:47.