Only bsolving for pb reported

marc · February 27, 2007, 03:15

hello,

when I start a simulation (for example the cavity case) only 'solving for p' is reported with some other info, but I am missing 'solving for U' or so. With an other case in simpleFoam still only 'solving for p' is reported. U, k, epsilon etc. are missing...does anybody know why and if it matters?

thanks, Marc

msrinath80 · April 10, 2007, 19:31

OK this is ridiculous. I have the same problem on one case and all others run fine. In fact I know that the velocities are getting computed as I find the saved results in the time-directory.

I have included the entire simpleFoam case. Can someone try it on their machine and report whether velocity calculations are printed in the log file?

Thanks!

The case can be found here:
http://www.ualberta.ca/~madhavan/sample.tar.gz

mattijs · April 12, 2007, 18:19

Hi pUI,

can you report this as a bug?

msrinath80 · April 12, 2007, 18:59

Will do Mattijs. Thanks.

February 27, 2007, 03:15	hello, when I start a simul	#1
marc New Member marc de boer Join Date: Mar 2009 Posts: 1 Rep Power: 0	hello, when I start a simulation (for example the cavity case) only 'solving for p' is reported with some other info, but I am missing 'solving for U' or so. With an other case in simpleFoam still only 'solving for p' is reported. U, k, epsilon etc. are missing...does anybody know why and if it matters? thanks, Marc

April 10, 2007, 19:31	OK this is ridiculous. I have	#2
msrinath80 Senior Member Srinath Madhavan (a.k.a pUl\|) Join Date: Mar 2009 Location: Edmonton, AB, Canada Posts: 703 Rep Power: 21	OK this is ridiculous. I have the same problem on one case and all others run fine. In fact I know that the velocities are getting computed as I find the saved results in the time-directory. I have included the entire simpleFoam case. Can someone try it on their machine and report whether velocity calculations are printed in the log file? Thanks! The case can be found here: http://www.ualberta.ca/~madhavan/sample.tar.gz

April 12, 2007, 18:19	Hi pUI, can you report this	#3
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	Hi pUI, can you report this as a bug?

April 12, 2007, 18:59	Will do Mattijs. Thanks.	#4
msrinath80 Senior Member Srinath Madhavan (a.k.a pUl\|) Join Date: Mar 2009 Location: Edmonton, AB, Canada Posts: 703 Rep Power: 21	Will do Mattijs. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
reported mass flow differs from monitored mass flo	London	FLUENT	4	July 17, 2008 12:44
Problematic geometry reported	smillerhh	FLUENT	1	December 7, 2006 11:42