|
[Sponsors] |
March 23, 2016, 12:06 |
nuTilda and epsilon in komegaSST
|
#1 |
Senior Member
Join Date: Mar 2016
Posts: 133
Rep Power: 10 |
Hi foamers, do you know if and when, using komegaSST, is required nuTilda and epsilon?
Best regards to all! |
|
March 23, 2016, 12:36 |
|
#2 |
Member
Eric Robertson
Join Date: Jul 2012
Posts: 95
Rep Power: 14 |
nuTilda is the turbulent viscosity-like variable in the transport equation for Spalart-Allmaras based models. It is not required for kw SST.
Epsilon is the turbulent dissipation, which is important for k-epsilon based models. The only variables concerning the SST model are k and omega. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
calculation of k, epsilon and omega | kroetenechse | OpenFOAM Pre-Processing | 31 | March 5, 2021 10:32 |
simpleFoam error - "Floating point exception" | mbcx4jc2 | OpenFOAM Running, Solving & CFD | 12 | August 4, 2015 02:20 |
Simulation seems to converge but crashes suddenly | xxxx | OpenFOAM | 16 | September 12, 2014 08:07 |
Orifice Plate with a fully developed flow - Problems with convergence | jonmec | OpenFOAM Running, Solving & CFD | 3 | July 28, 2011 05:24 |
Very high courant number, time step continuity errors and bounding epsilon | erncyc | OpenFOAM Running, Solving & CFD | 1 | March 24, 2011 11:00 |