CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Question about coodles

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 20, 2006, 04:58
Default I created a model in coodles u
  #1
Member
 
Dihao Tang
Join Date: Mar 2009
Posts: 78
Rep Power: 17
tangd is on a distinguished road
I created a model in coodles using the existed pitzDaily mesh as template. I try to implement totalPressure and fix the temperature at inlet, while static pressure at outlet.

But there is no such boundary type I can use directly from FoamX, so I chose pressureInlet for inlet, and then changed pressure type from "fixedValue" to "totalPressure". I read from board and found that pressureTransmissive is helpful, so I applied pressureTransmissiveOutlet boundary type for outlet. I assigned 100bar to inlet totalPressure, and kept the outlet pressure setting from pitzDaily which is
OUT
{
type pressureTransmissive;
pInf 1e5;
lInf 0.3;
value uniform 1e5;
}

I expected that the pressure difference will result in mass flow inside the system then achieved a stable status. But from the plot Courant number over time, I observed the oscillation always occurring, it doesn't tend to stability. I think that the boundary condition was not correctly imposed. Can somebody give me some tips about how to set the boundary condition correctly? Thank you so much!
tangd is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coodles anja OpenFOAM Pre-Processing 33 January 14, 2010 10:05
Coodles vs sonicTurbFoam hsieh OpenFOAM Running, Solving & CFD 10 February 3, 2009 07:17
Pressure waves bouncing around while using coodles ankgupta8um OpenFOAM Running, Solving & CFD 4 March 5, 2008 07:54
Pow in lib64tlslibmso6 SigFpe when running coodles with SpalartAllmaras lillberg OpenFOAM Bugs 4 December 7, 2007 09:17
Startingsetting coodles on an academic case melanie OpenFOAM Running, Solving & CFD 5 March 30, 2006 05:00


All times are GMT -4. The time now is 12:33.