CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Spray interpolation scheme (http://www.cfd-online.com/Forums/openfoam-solving/60163-spray-interpolation-scheme.html)

chris1980 June 15, 2006 01:30

when I try to use cellPointFac
 
when I try to use cellPointFace interpolation scheme the following error in OF1.3 shows in up:

--> FOAM FATAL ERROR : Not implemented

From function void CyclicPointPatchField<patchfield,>::evaluate()
in file /home/dm2/henry/OpenFOAM/OpenFOAM-1.3/src/OpenFOAM/lnInclude/CyclicPointPatchFie ld.C at line 187.

FOAM aborting

Foam::error::printStack(Foam:http://www.cfd-online.com/OpenFOAM_D...part/proud.gifstream&)
Foam::error::abort()
Foam::CyclicPointPatchField<foam::pointpatchfield, > >::evaluate()
Foam::GeometricField<foam::vector<double>, Foam::pointPatchField, Foam::pointMesh>::GeometricBoundaryField::evaluate ()
void Foam::volPointInterpolation::interpolate<foam::vec tor<double> >(Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<foam::vector<double>, Foam::pointPatchField, Foam::pointMesh>&) const
Foam::tmp<foam::geometricfield<foam::vector<double >, Foam::pointPatchField, Foam::pointMesh> > Foam::volPointInterpolation::interpolate<foam::vec tor<double> >(Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&) const
Foam::interpolationCellPointFace<foam::vector<doub le> >::interpolationCellPointFace(Foam::volPointInterp olation const&, Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&)
Foam::interpolation<foam::vector<double> >::adddictionaryConstructorToTable<foam::interpola tioncellpointface<foam::vector <double> > >::New(Foam::volPointInterpolation const&, Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&)
Foam::interpolation<foam::vector<double> >::New(Foam::dictionary const&, Foam::volPointInterpolation const&, Foam::GeometricField<foam::vector<double>, Foam::fvPatchField, Foam::volMesh> const&)
Foam::spray::evolve()

In OF1.2 there is no problem with this interpolation scheme. Why is this interpolation no more supported?

mattijs June 16, 2006 13:58

See http://www.cfd-online.c
 
See

http://www.cfd-online.com/cgi-bin/Op...=7286#POST7286

and others.


All times are GMT -4. The time now is 07:52.