CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   incompatible dimension with interFoam (http://www.cfd-online.com/Forums/openfoam-solving/60334-incompatible-dimension-interfoam.html)

aurelia February 6, 2006 11:45

Hello When I run my case with
 
Hello
When I run my case with interFoam, I have the following:

--> FOAM FATAL ERROR : incompatible dimensions for operation [pcorr[-1 3 -1 0 0 0 0] ] == [div(phi)[0 0 -1 0 0 0 0] ]

From function checkMethod(const fvMatrix<type>&, const GeometricField<type,fvpatchfield,>&)

in file /home/dm2/henry/OpenFOAM/OpemFOAM-1.2/src/OpenFOAM/lnInclude/fvMatrix.C at line 935.

FOAM aborting

the damBreak case works fine
does someone know what I did wrong?
Thanks
Aurelia

eugene February 6, 2006 11:54

Best guess is one of your init
 
Best guess is one of your initial field dimensions is incorrected (usually pressure or dynamic viscosity). Compare with the interFoam sets.

aurelia February 6, 2006 12:06

yes, it was the pressure than
 
yes, it was the pressure
thank you Eugene

Aurelia


All times are GMT -4. The time now is 09:12.