 |
 |
 |
|
|
|
[Sponsors] | ||||
June 10, 2005, 15:31
|
Hi everybody. I'm new to openF
|
#1 |
|
New Member
Rogério Oliveira
Join Date: Mar 2009
Posts: 1
Rep Power: 0  |
Hi everybody. I'm new to openFoam and Would like to solve a steady state turbulent flow for Newtonian fluid (water). Can someone tell me which solver I have to use. I read that simpleFoam is used for transient flows and simpleFoam is used for non-Newtonian fluids. Could I use simplefoam for Newtonian fluid or turbfoam for steady state simulation? Thanks in advance.
Rogério |
|
|
|
|
|
June 12, 2005, 18:34
|
You can use either solver.
|
#2 |
|
Senior Member
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26 |
You can use either solver.
You might want to run simpleFoam first (is fast to reach some kind of steady-state flow) and then restart using turbFoam to make sure your flow is actually steady. |
|
|
|
|
|
|
June 13, 2005, 07:16
|
You might find it useful to go
|
#3 |
|
Senior Member
Join Date: Mar 2009
Posts: 854
Rep Power: 22 |
You might find it useful to go through the tutorials which will make it clear which solver is appropriate as well as helping you understand how to run OpenFOAM.
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| C programming question eg simpleFoam | marc_wattenberg | OpenFOAM Post-Processing | 3 | January 27, 2009 18:32 |
| TurbFoam simpleFoam incompatible fields for operation | braennstroem | OpenFOAM Running, Solving & CFD | 0 | June 19, 2008 10:43 |
| What if I use turbfoam instead of simplefoam what is steady turblence | lakeat | OpenFOAM Running, Solving & CFD | 4 | January 18, 2008 12:13 |
| SimpleFoam result for turbFoam initialisation | philippose | OpenFOAM Running, Solving & CFD | 0 | November 26, 2006 10:24 |
| Differences between simpleFoam an turbFoam | francois | OpenFOAM Running, Solving & CFD | 3 | November 15, 2005 14:03 |
Linear Mode
