CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (http://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Angular velocity in OpenFoam (http://www.cfd-online.com/Forums/openfoam-solving/60596-angular-velocity-openfoam.html)

brain April 27, 2005 17:26

hi, hello, if there is someb
 
hi,
hello, if there is somebody who can help me how to introduce an angular velocity in OpenFoam. I have a mobile which turns in a bath, thank you for all information.

henry April 27, 2005 17:39

You might find it useful to lo
 
You might find it useful to look at engineSwirl or engineSwirl2 in OpenFOAM-1.1/applications/utilities/preProcessing

brain May 3, 2005 08:00

hello, I have to look at the
 
hello,
I have to look at the case engineSwirl, but I could not apply it for my case, because I wanted to put in rotation a mobile inside a cylindrical reactor. if you have comments around this!.
thank's again,

henry May 3, 2005 08:04

Try adapting it for your purpo
 
Try adapting it for your purpose or creating an initialisation utility similar to engineSwirl which does exactly what you need.

brain May 18, 2005 11:32

hello, I could apply a rot
 
hello,

I could apply a rotation speed in my case, so the existing example it is in 2D, and if i can use it for 3D generation and use another notation ( not InsideSlider and OutsideSlider for mixer2D in tutorials/icoTopoFoam).
thank's again,


All times are GMT -4. The time now is 19:03.