|
[Sponsors] |
June 30, 2009, 12:51 |
Performance 1.5-dev with ggi
|
#1 |
Senior Member
BastiL
Join Date: Mar 2009
Posts: 530
Rep Power: 20 |
Dear all,
I run a large case with about 30 million cells on 32 CPUs using openmpi1.6 from OpenFOAM build with mx-support. One iteration for this run takes about 80 seconds. Fluent uses about 60 seconds with the coupled solver, the seggregated solver is much quicker. My FLUENT setup is optimised, my FOAM setup is not (I do not really know how to do). This difference looks extremely large to me. What can this be caused by? Thanks BastiL |
|
June 30, 2009, 16:46 |
|
#2 |
Senior Member
BastiL
Join Date: Mar 2009
Posts: 530
Rep Power: 20 |
Some more infos to add:
FLUENT runs with HP-MPI and 2nd order upwind. OF with the central differencing schemes. I have read that these are quickest in OF. I am not sure if the poor performance is caused by the ggis - I could try run a comparison case without ggi. Regards BastiL |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Performance of GGI case in parallel | hannes | OpenFOAM Running, Solving & CFD | 26 | August 3, 2011 04:07 |
GGI ERCOFTAC and general questions | david | OpenFOAM Running, Solving & CFD | 8 | August 25, 2008 10:22 |
OpenFOAM Version 1.5 Released | OpenFOAM discussion board administrator | OpenFOAM Announcements from ESI-OpenCFD | 0 | July 14, 2008 19:22 |
P4 1.5 or Dual P3 800EB on Gibabyte board | Danial | FLUENT | 4 | September 12, 2001 12:44 |
CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 13, 2001 00:19 |