Error

andesameer

Dear All,
At the time of solving rhoSimplefoam, I was getting following error.
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.5 |
| \\ / A nd | Web: http://www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Exec : rhoSimpleFoam
Date : Jul 21 2009
Time : 12:59:25
Host : bagvapp
PID : 3213
Case : /home/bagside/OpenFOAM/OpenFOAM-1.5/run/tutorials/rhoSimpleFoam/injectorthermal
nProcs : 1
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time
Create mesh for time = 0
Reading thermophysical properties
Selecting thermodynamics package hThermo<pureMixture<constTransport<specieThermo<hC onstThermo<perfectGas>>>>>
Reading field U
Reading/calculating face flux field phi
Creating turbulence model
Selecting RAS turbulence model kEpsilon
kEpsilonCoeffs
{
Cmu 0.09;
C1 1.44;
C2 1.92;
C3 -0.33;
alphah 1;
alphak 1;
alphaEps 0.76923;
}

Starting time loop
Time = 1
DILUPBiCG: Solving for Ux, Initial residual = 1, Final residual = 1.11968e-06, No Iterations 7
DILUPBiCG: Solving for Uy, Initial residual = 1, Final residual = 7.16559e-06, No Iterations 6
DILUPBiCG: Solving for Uz, Initial residual = 1, Final residual = 3.83583e-06, No Iterations 6
#0 Foam::error:rintStack(Foam::Ostream&) in "/home/bagside/OpenFOAM/OpenFOAM-1.5/lib/linuxGccDPOpt/libOpenFOAM.so"
#1 Foam::sigFpe::sigFpeHandler(int) in "/home/bagside/OpenFOAM/OpenFOAM-1.5/lib/linuxGccDPOpt/libOpenFOAM.so"
#2 Uninterpreted: [0x110400]
#3 Foam::divide(Foam::Field<double>&, Foam::UList<double> const&, Foam::UList<double> const&) in "/home/bagside/OpenFOAM/OpenFOAM-1.5/lib/linuxGccDPOpt/libOpenFOAM.so"
#4 void Foam::divide<Foam::fvsPatchField, Foam::surfaceMesh>(Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh>&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&) in "/home/bagside/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/rhoSimpleFoam"
#5 Foam::tmp<Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> > Foam:perator/<Foam::fvsPatchField, Foam::surfaceMesh>(Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::tmp<Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> > const&) in "/home/bagside/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/rhoSimpleFoam"
#6 main in "/home/bagside/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/rhoSimpleFoam"
#7 __libc_start_main in "/lib/libc.so.6"
#8 Foam::regIOobject::readIfModified() in "/home/bagside/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/rhoSimpleFoam"

In the rhoSimpleFoam, I am solving injectionmixer thermal problem. Injectionmixer has two inlets. At Inlet1, air is entering at 10 m/s, 295 K and at Inlet2 air is entering at 0.1 m/s, 315K. In this Foam, I am using KEpslion turbulence model.
Does anyone know what this error means? Thanks for any help!
Best Regards,
Sam